INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B

RS 제품 번호:: 260-0132
제조사 부품 번호:: 208-XL-NPP-B
제조업체:: INA

INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B

모든 Bearing Inserts 열람하기

Subtotal (1 unit)*

₩64,380.00

재고있음

추가로 2026년 10월 12일 부터 15 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩64,380.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

Our Better World range features products that make it easy for you to make a greener product choice you can trust.

Learn more about RS Better World products

RS 제품 번호:: 260-0132
제조사 부품 번호:: 208-XL-NPP-B
제조업체:: INA

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	INA
	Product Type	Bearing Insert
	Inside Diameter	40mm
	Outside Diameter	80mm
	Material	Stainless Steel
	Static Load Rating	19.8N
	Dynamic Load Rating	34500N
	End Type	Open
	Bore Type	Deep Groove
	Series	2- NPP-B
	Overall Width	18mm
	Standards/Approvals	No
	Better World Claim	Extended Product Life, Saves Energy
	Better World Product	Yes

	모두 선택
	브랜드 INA
	Product Type Bearing Insert
	Inside Diameter 40mm
	Outside Diameter 80mm
	Material Stainless Steel
	Static Load Rating 19.8N
	Dynamic Load Rating 34500N
	End Type Open
	Bore Type Deep Groove
	Series 2- NPP-B
	Overall Width 18mm
	Standards/Approvals No
	Better World Claim Extended Product Life, Saves Energy
	Better World Product Yes

Datasheet - 208-XL-NPP-B

로그인하여 CAD 모델 다운로드

Schaeffler 2- NPP-B Series Bearing Insert, 80mm Outside Diameter, 40mm Inside Diameter - 208-XL-NPP-B

This bearing insert provides rotational support for shafts in machinery where corrosion resistance and stable radial load handling are required. It is constructed from stainless steel and designed with an open end to facilitate installation and maintenance in bearing housings. The component incorporates a deep-groove bore type to support consistent shaft alignment during operation.

Features and Benefits:

• Dynamic capacity of 34,500 N improves load-bearing performance under motion
• Static load capability of 19.8 N resists displacement when stationary
• Stainless-steel construction offers corrosion resistance in harsh environments
• Deep-groove geometry maintains radial stability under varying speeds
• Open-end configuration allows easier insertion and removal during servicing

Applications

• Suitable for conveyor shaft support in corrosive conditions
• Used with electric motor shafts requiring radial stability
• Ideal for machine-tool spindle housings with frequent maintenance
• Can be used for agricultural equipment exposed to moisture
• Suitable for industrial gearboxes needing Compact bearing solutions

What is the internal bore diameter and how does it affect shaft selection?

The bore measures 40 mm, which determines the mating shaft diameter and tolerance class needed for the correct interference or clearance fit.

What are the external dimensions relevant to housing design?

The outside diameter is 80 mm and the overall width is 18 mm, which define the space required in a housing bore and face clearance.

How does the open end form influence installation procedures?

The open end permits axial access, allowing the insert to be slid onto the shaft from one side and aiding retention-ring or housing-cap assembly.

What operating loads should be considered for stationary versus dynamic conditions?

Use the 19.8 N static rating to assess holding or preload limits when stationary and the 34,500 N dynamic rating to evaluate loads during rotation.