RS Better World
INA Bearing Insert 35 mm ID 72 mm OD 207-XL-NPP-B
- RS 제품 번호:
- 260-0130
- 제조사 부품 번호:
- 207-XL-NPP-B
- 제조업체:
- INA
Subtotal (1 unit)*
₩51,540.00
재고있음
- 추가로 2026년 10월 12일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩51,540.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
Our Better World range features products that make it easy for you to make a greener product choice you can trust.
Learn more about RS Better World products
- RS 제품 번호:
- 260-0130
- 제조사 부품 번호:
- 207-XL-NPP-B
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 35mm | |
| Outside Diameter | 72mm | |
| Material | Stainless Steel | |
| Static Load Rating | 15.3N | |
| Dynamic Load Rating | 27500N | |
| End Type | Open | |
| Series | 207-XL-NPP-B | |
| Overall Width | 17mm | |
| Standards/Approvals | No | |
| Bore Type | Deep Groove | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Bearing Insert | ||
Inside Diameter 35mm | ||
Outside Diameter 72mm | ||
Material Stainless Steel | ||
Static Load Rating 15.3N | ||
Dynamic Load Rating 27500N | ||
End Type Open | ||
Series 207-XL-NPP-B | ||
Overall Width 17mm | ||
Standards/Approvals No | ||
Bore Type Deep Groove | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Schaeffler 207-XL-NPP-B Series Bearing Insert, 35mm Inside Diameter, 72mm Outside Diameter - 207-XL-NPP-B
This bearing insert is a stainless steel component designed to support rotational shafts within machinery where a deep-groove configuration is required. It operates as an open-ended insert suited for installations that need Durable contact between housing and shaft, providing controlled dynamic response under load in industrial contexts.
Features and Benefits:
• Deep-groove design provides stable radial load handling
• Stainless steel construction resists wear in demanding environments
• Dynamic capacity of 27,500 N supports high operational loads
• Static load allowance of 15.3 N minimises displacement under stationary loads
• Open end format enables straightforward shaft insertion and maintenance
• Stainless steel construction resists wear in demanding environments
• Dynamic capacity of 27,500 N supports high operational loads
• Static load allowance of 15.3 N minimises displacement under stationary loads
• Open end format enables straightforward shaft insertion and maintenance
Applications
• Suitable for conveyor drive shaft assemblies in factories
• Used for gearboxes requiring robust radial bearings
• Ideal for rotating rollers in material-handling systems
• Can be used for pump shaft support in industrial plants
• Used for gearboxes requiring robust radial bearings
• Ideal for rotating rollers in material-handling systems
• Can be used for pump shaft support in industrial plants
What internal bore sizing should I expect for shaft selection?
The insert accepts a 35 mm internal shaft diameter allowing direct fitment without additional adaptors.
How does the outside diameter affect housing design?
The housing should accommodate a 72 mm outside diameter to ensure correct seating and load distribution.
What width should the housing clearance allow for axial stability?
Provision for a 17 mm overall width is required to maintain axial alignment and correct bearing engagement.
How does the open end format influence assembly access?
The open end permits axial insertion of the shaft and simplifies removal for routine inspection or replacement.
관련된 링크들
- INA Bearing Insert 35 mm ID 72 mm OD GRAE35-XL-NPP-B
- INA Bearing Unit Insert 35 mm ID 72 mm OD RAE35-XL-NPP-FA106
- INA Bearing Insert 35 mm ID 72 mm OD 207-XL-KRR-AH03
- INA Spherical Bearing 35 mm ID 72 mm OD RAE35-XL-NPP-B
- INA Bearing Insert 35 mm ID 72 mm OD GLE35-XL-KRR-B
- INA Bearing Insert 35 mm ID 72 mm OD GE35-XL-KTT-B
- INA Bearing Insert 40 mm ID 80 mm OD 208-XL-NPP-B
- INA Bearing Insert 30 mm ID 62 mm OD 206-XL-NPP-B