Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported

Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly

Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques

Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported

Damping of running noise is required

수량	한팩당
1 - 12	₩115,432.00
13 - 24	₩110,826.00
25 +	₩108,494.80

모두 선택	제품 정보	값
	브랜드	INA
	Inside Diameter	35 mm
	Product Type	Bearing Insert
	Outside Diameter	72 mm
	Static Load Rating	27.5kN
	Dynamic Load Rating	15.3kN
	Standards/Approvals	No
	Overall Width	37.7mm
	Bore Type	Round
	Series	GE

	모두 선택
	브랜드 INA
	Inside Diameter 35 mm
	Product Type Bearing Insert
	Outside Diameter 72 mm
	Static Load Rating 27.5kN
	Dynamic Load Rating 15.3kN
	Standards/Approvals No
	Overall Width 37.7mm
	Bore Type Round
	Series GE

INA Bearing Insert 35 mm ID 72 mm OD GLE35-XL-KRR-B

관련된 링크들