RS Better World
INA Bearing Insert 17 mm ID 40 mm OD 203-XL-KRR
- RS 제품 번호:
- 260-0125
- 제조사 부품 번호:
- 203-XL-KRR
- 제조업체:
- INA
Subtotal (1 unit)*
₩41,900.00
일시적 품절
- 2026년 11월 24일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩41,900.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
Our Better World range features products that make it easy for you to make a greener product choice you can trust.
Learn more about RS Better World products
- RS 제품 번호:
- 260-0125
- 제조사 부품 번호:
- 203-XL-KRR
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 17mm | |
| Outside Diameter | 40mm | |
| Static Load Rating | 4.75N | |
| Dynamic Load Rating | 9.8N | |
| End Type | Open | |
| Overall Width | 18.3mm | |
| Series | 203-XL-KRR | |
| Standards/Approvals | No | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Bearing Insert | ||
Inside Diameter 17mm | ||
Outside Diameter 40mm | ||
Static Load Rating 4.75N | ||
Dynamic Load Rating 9.8N | ||
End Type Open | ||
Overall Width 18.3mm | ||
Series 203-XL-KRR | ||
Standards/Approvals No | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
제외
Schaeffler 203-XL-KRR Series Bearing Insert, 17mm Inside Diameter, 40mm Outside Diameter - 203-XL-KRR
This bearing insert is designed to provide supported rotational movement within assemblies where compact, metric inserts are required. It is intended for installations that need a sealed insert bearing configuration offering defined static and dynamic load capacities while maintaining an economical overall footprint.
Features and Benefits:
• 4.75N static load rating reduces deformation under stationary loads
• 9.8N dynamic load capacity supports continuous rotating loads
• Sealed construction limits contamination ingress during operation
• Robust performance for repeated start-stop duty cycles
• 9.8N dynamic load capacity supports continuous rotating loads
• Sealed construction limits contamination ingress during operation
• Robust performance for repeated start-stop duty cycles
Applications
• Suitable for small electric motor shaft support
• Used with gearbox idler shafts in Compact drives
• Ideal for conveyor roller pivot points in light systems
• Can be used for agricultural sensor pivot mechanisms
• Used with gearbox idler shafts in Compact drives
• Ideal for conveyor roller pivot points in light systems
• Can be used for agricultural sensor pivot mechanisms
What shaft size does it accept?
It is compatible with a 17mm internal bore to fit corresponding shafts.
How does the insert integrate into housings?
The outer dimension of 40mm allows press-fit into metric housings designed for that outer diameter.
What overall width is required for installation depth?
The component occupies 18.3mm of axial space, informing housing depth requirements.
Which load condition is critical for static applications?
The 4.75N static capacity defines the maximum stationary radial load before increased deformation occurs.
How does dynamic loading affect selection?
The 9.8N dynamic rating should be used to assess running load limits for continuous rotation.
관련된 링크들
- INA Bearing Insert 16.2 mm ID 40 mm OD 203-XL-KRR-AH02
- INA Bearing Insert 20 mm ID 47 mm OD 204-XL-KRR
- INA Bearing Insert 30 mm ID 62 mm OD GE30-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GLE30-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GLE40-XL-KRR-B
- INA Bearing Insert 45 mm ID 85 mm OD GLE45-XL-KRR-B
- INA Bearing Insert 60 mm ID 110 mm OD GLE60-XL-KRR-B
- INA Bearing Insert 60 mm ID 110 mm OD GYE60-XL-KRR-B