Moflash LEDS100 Series Green Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

RS 제품 번호:: 865-1716
제조사 부품 번호:: LEDS100-05-04
제조업체:: Moflash

Moflash LEDS100 Series Green Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

Subtotal (1 unit)*

₩80,200.80

재고있음

추가로 2026년 1월 05일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩80,200.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 865-1716
제조사 부품 번호:: LEDS100-05-04
제조업체:: Moflash

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Moflash
	Supply Voltage	85 → 280 V ac, 85 → 380 V dc
	Light Effect	Flashing
	Lens Colour	Green
	Mounting Style	Surface Mount
	Bulb Type	LED
	Current Type	AC, DC
	Current Consumption	35mA
	Base Diameter	72mm
	Housing Colour	Black
	Lamp Included	Yes
	Series	LEDS100
	Multifunction	Yes
	Height	107mm
	Base Length	33mm
	IP Rating	IP65
	Minimum Temperature	-25°C
	Maximum Temperature	+55°C
	Standards Met	CE, RoHS
	Special Features	Dust Proof, Low Current Consumption, Water Resistant

	모두 선택
	브랜드 Moflash
	Supply Voltage 85 → 280 V ac, 85 → 380 V dc
	Light Effect Flashing
	Lens Colour Green
	Mounting Style Surface Mount
	Bulb Type LED
	Current Type AC, DC
	Current Consumption 35mA
	Base Diameter 72mm
	Housing Colour Black
	Lamp Included Yes
	Series LEDS100
	Multifunction Yes
	Height 107mm
	Base Length 33mm
	IP Rating IP65
	Minimum Temperature -25°C
	Maximum Temperature +55°C
	Standards Met CE, RoHS
	Special Features Dust Proof, Low Current Consumption, Water Resistant

COO (Country of Origin):: GB

Moflash Industrial ECO LED Beacon - LEDS100 Series

The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.

Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked

Moflash Beacon, Green Lens Colour, 85 to 280V AC Voltage Rating - LEDS100 Series - LEDS100-05-04

Use this green beacon from Moflash to signal safe operating conditions in your workplace. Its eight surface-mounted LEDs emit a bright light while consuming only 35mA of current, making it an energy-efficient choice. The beacon's construction lets you terminate wires inside its enclosure for a tidy setup with no loose or exposed cables. An ABS base and PC lens mean this unit is durable and resistant to impact, so it's suitable for use in harsh environments.

Features & Benefits

• Wide operating temperature range of -25°C to +55°C for use in demanding conditions
• IP65 rating means it's protected against dust and low-pressure water jets
• Offers a choice of flashing and continuous modes for versatility

Applications

• Fire stations
• Chemical laboratories
• Commercial buildings

How do I switch between flashing and continuous mode on this beacon?

Simply use the jumper link on the PCB to select the signalling mode for this beacon.