Moflash LEDS100 Series Amber Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

모든 Beacons 열람하기

Subtotal (1 unit)*

₩129,381.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
  • 추가로 다른 지역에서 17 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩129,381.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
865-1704
제조사 부품 번호:
LEDS100-05-01
제조업체:
Moflash
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Moflash

Supply Voltage

85 → 280 V ac, 85 → 380 V dc

Light Effect

Flashing

Lens Colour

Amber

Mounting Style

Surface Mount

Bulb Type

LED

Current Type

AC, DC

Current Consumption

35mA

Base Diameter

72mm

Housing Colour

Black

Lamp Included

Yes

Series

LEDS100

Multifunction

Yes

Height

107mm

IP Rating

IP65

Base Length

33mm

Maximum Temperature

+55°C

Standards Met

CE Certified

Special Features

Dust Proof, Low Current Consumption, Water Resistant

Minimum Temperature

-25°C

COO (Country of Origin):
GB

Moflash Industrial ECO LED Beacon - LEDS100 Series


The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.

Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked

Moflash Amber LED Beacon, 40 to 380V DC, 85 to 285V AC - LEDS100 Series - LEDS100-05-01


This Moflash LED (light-emitting diode) beacon is used to signal hazards in commercial and industrial work environments. The warning light has a 360° output along the vertical axis to make sure the warning signal is visible in all directions. The LED bulb is bright enough to be seen clearly in most lighting conditions for effective signalling. It's also energy-efficient thanks to its low current consumption of just 35mA. For versatility, the light can be set to a flashing or continuous mode via a jumper link on the PCB (printed circuit board).

Features & Benefits


• Broad operating temperature range of -25°C to +55°C for use in demanding environments
• Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions
• Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups

Applications


• Maintenance equipment
• Emergency service vehicles
• Airport baggage claims
• Manufacturing lines

Is this beacon suitable for use in damp or dusty environments?


The beacon has an IP65 (ingress protection) rating, so it's completely protected against dust and low-pressure water jets from all directions.

관련된 링크들