STMicroelectronics, Battery Charge Controller IC, 48 V to 48 V Input 5.4 V Output 200 mA, TQFP 64-Pin
- RS 제품 번호:
- 219-4219P
- 제조사 부품 번호:
- L9963E-TR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩912,600.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 50 - 99 | ₩18,252.00 |
| 100 - 249 | ₩17,803.50 |
| 250 - 499 | ₩17,355.00 |
| 500 + | ₩16,926.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 219-4219P
- 제조사 부품 번호:
- L9963E-TR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Sub Type | Battery Charge Controller IC | |
| Product Type | Battery Charge Controller IC | |
| Mount Type | Surface | |
| Package Type | TQFP | |
| Pin Count | 64 | |
| Minimum Supply Voltage | 48V | |
| Output Current | 200mA | |
| Maximum Operating Temperature | 105°C | |
| Maximum Supply Voltage | 48V | |
| Series | L9963E | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Minimum Operating Temperature | -40°C | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Sub Type Battery Charge Controller IC | ||
Product Type Battery Charge Controller IC | ||
Mount Type Surface | ||
Package Type TQFP | ||
Pin Count 64 | ||
Minimum Supply Voltage 48V | ||
Output Current 200mA | ||
Maximum Operating Temperature 105°C | ||
Maximum Supply Voltage 48V | ||
Series L9963E | ||
Standards/Approvals No | ||
Length 10mm | ||
Minimum Operating Temperature -40°C | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics L9963E is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems. Each cell voltage is measured with high accuracy, as well as the current for the on-chip coulomb counting. The device can monitor up to 7 NTCs. The information is transmitted through SPI communication or isolated interface.
AEC-Q100 qualified
Measures 4 to 14 cells in series, with 0 μs desynchronization delay between samples. Supports also Busbar connection without altering cell results
Coulomb counter supporting pack overcurrent detection in both ignition on and off states. Fully synchronized current and voltage samples
