대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩11,760.00
재고있음
- 74 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 24 | ₩11,760.00 |
| 25 - 49 | ₩11,440.00 |
| 50 + | ₩10,960.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 286-8151
- 제조사 부품 번호:
- 6301
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 12mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 37mm | |
| Race Width | 12mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 4.15kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 10.1kN | |
| Standards/Approvals | No | |
| Series | 3 Medium | |
| Bore Type | Parallel | |
| Limiting Speed | 28000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 12mm | ||
Product Type Ball Bearing | ||
Outside Diameter 37mm | ||
Race Width 12mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 4.15kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 10.1kN | ||
Standards/Approvals No | ||
Series 3 Medium | ||
Bore Type Parallel | ||
Limiting Speed 28000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
제외
SKF Ball Bearing, Deep-Groove Bearing Type, Parallel Bore, 12mm ID, 37mm OD - 6301
Easy to mount, quiet during operation and needing little maintenance, this single-row deep-groove ball bearing from SKF gets the job done with the minimum of fuss. You can use it to rotate a degree of axial load along with heavy radial loads of up to 10.1 kN. The parallel bore means you can easily fit it onto a shaft with no need for a bearing housing. As the unit's optimised for low vibration, it can operate at lower speeds to minimise wear and ensure a long service life.
Features & Benefits
• Steel construction combines strength with resistance to corrosion
• Open-ended design allows the lubricant to circulate freely for smooth running
Applications
• Construction equipment
• Industrial pumps
• Agricultural machinery
When should I choose a single-row ball bearing?
Single-row ball bearings like this one are best suited to rotating relatively light to moderate loads at high speed. They're engineered with precision races to support smooth running.
When should I choose an open-ended bearing?
Open-ended bearings are suitable for use in environments where you don't need to worry about dust or dirt contaminating the workings. For dirty environments, shielded or sealed bearings are more suitable.
Deep Groove Metric Ball Bearings - Open
This range of ball bearings from SKF are deep groove metric ball bearings with an open end. They are extremely versatile for a wide range of applications.
SKF single row, deep groove ball bearings are available with an inner diameter from 3mm to 95mm, so you will be sure to find a ball bearing for your application.
More Information:
Why Choose an Open Ended Ball Bearing?
Open bearings have an open side where the balls are visible. This means they do not have a seal or shield. Open bearings are ideal for environments where they won’t come into contact with dirt as this could disrupt the bearing. Open ball bearings instead allow the lubricant inside to travel freely around the bearing for smooth running.
Why Choose a Single Row Deep Groove Ball Bearing?
This type of ball bearing it often the most popular because of its versatility. They are ideal for high speeds and can handle a good radial load capacity, all will very little maintenance required.
“Deep Groove” refers to the race (the groove where the balls rest). There is therefore a larger space between the inner and outer rings, than the diameter of the ball. This leaves space for the rubber seals.
Why choose a steel ball bearing?
Steel is the perfect material for ball bearings as it provides strength and reliability whilst being corrosion-resistant. Steel ball bearings are suitable for installing as they require very little maintenance and are designed to last.
관련된 링크들
- SKF 6301-2Z 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- SKF 6301/C3 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- RS PRO 6301-2RS 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- NSK 6301 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- SKF 6301-2RSH 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- SNR 6301ZZ 1 Row Deep Groove Ball Bearing - 12 mm ID, 37 mm OD
- SKF 6301-2Z/C3 1 Row Ball Bearing - 12 mm ID, 37 mm OD
- SKF 6301-2RSH/C3 1 Row Ball Bearing - 12 mm ID, 37 mm OD