FAG 6204-C-2Z>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- RS 제품 번호:
- 260-0871
- 제조사 부품 번호:
- 6204-C-2Z>V
- 제조업체:
- FAG
Subtotal (1 unit)*
₩11,300.00
재고있음
- 추가로 2026년 9월 14일 부터 36 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩11,300.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0871
- 제조사 부품 번호:
- 6204-C-2Z>V
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 20mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 47mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 6.6kN | |
| Dynamic Load Rating | 14.7kN | |
| Standards/Approvals | No | |
| Series | Generation C | |
| Bore Type | Cylindrical | |
| Limiting Speed | 20600rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 20mm | ||
Product Type Ball Bearing | ||
Outside Diameter 47mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 6.6kN | ||
Dynamic Load Rating 14.7kN | ||
Standards/Approvals No | ||
Series Generation C | ||
Bore Type Cylindrical | ||
Limiting Speed 20600rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
- COO (Country of Origin):
- PT
Schaeffler Generation C Series Ball Bearing, 20mm Inside Diameter, 47mm Outside Diameter - 6204-C-2Z >V
This ball bearing is a single-row deep-groove component designed to support radial loads in rotating assemblies within automation, electronics and mechanical systems. It is a closed-end, cylindrical-bore bearing intended for medium-duty applications where Compact mounting and consistent rotational performance are required. The unit operates across a broad temperature span and is suitable for installations that demand a sealed, maintenance-friendly rolling element.
Features & Benefits
• 20600 r/min limiting speed enables high-speed rotor operation
• 14.7 kN dynamic load rating sustains continuous radial loading
• 6.6 kN static rating resists deformation under shock loads
• Steel sheet-metal cage gives dimensional stability at elevated speeds
• 14.7 kN dynamic load rating sustains continuous radial loading
• 6.6 kN static rating resists deformation under shock loads
• Steel sheet-metal cage gives dimensional stability at elevated speeds
**Applications**
• Suitable for precision motor assemblies in automation equipment
• Ideal for small gearbox input shafts in industrial drives
• Used for spindle support in electrical actuator modules
• Can be used for fan and blower shafts in electronic cooling systems
• Ideal for small gearbox input shafts in industrial drives
• Used for spindle support in electrical actuator modules
• Can be used for fan and blower shafts in electronic cooling systems
What mounting shoulder dimensions are required for correct seating?
The minimum shaft shoulder diameter for proper mounting is 25.6mm and the maximum housing shoulder diameter is 41.4mm to ensure secure axial locating.
What operational temperature limits should be observed during service?
The bearing is rated for operation between -20°C to 120°C
stay within this range for designed material and lubricant behaviour.
How should fillet and chamfer allowances be handled when designing housings?
Maximum permissible fillet radius at the shoulder is 1mm and minimum chamfer dimension is 1mm to avoid interference with ring edges.
What reference speed is used for thermal considerations during continuous duty?
Use the reference speed of 18100 r/min when calculating steady-state thermal and lubrication performance.
관련된 링크들
- FAG 6204-C-2Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z-C3>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- SKF 6204-Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- SKF 6204-2Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD