SKF QJ 203 N2MA/C2L 1 Row Ball Bearing - 17 mm ID, 40 mm OD 12 mm Race Width
- RS 제품 번호:
- 208-0392
- 제조사 부품 번호:
- QJ 203 N2MA/C2L
- 제조업체:
- SKF
Subtotal (1 unit)*
₩412,820.00
일시적 품절
- 2026년 10월 12일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩412,820.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0392
- 제조사 부품 번호:
- QJ 203 N2MA/C2L
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 40mm | |
| Race Width | 12mm | |
| Ball Material | Steel | |
| Cage Material | Machined Metal | |
| End Type | Open | |
| Number of Rows | 1 | |
| Contact Angle | 35° | |
| Internal Clearance | C2 | |
| Static Load Rating | 11.4kN | |
| Dynamic Load Rating | 17kN | |
| Series | QJ | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 30000rpm | |
| Bearing Type | Four Point Contact | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 40mm | ||
Race Width 12mm | ||
Ball Material Steel | ||
Cage Material Machined Metal | ||
End Type Open | ||
Number of Rows 1 | ||
Contact Angle 35° | ||
Internal Clearance C2 | ||
Static Load Rating 11.4kN | ||
Dynamic Load Rating 17kN | ||
Series QJ | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 30000rpm | ||
Bearing Type Four Point Contact | ||
- COO (Country of Origin):
- AT
SKF Series QJ Ball Bearing, 17mm Inside Diameter, 40mm Outside Diameter - QJ 203 N2MA/C2L
This ball bearing is a single-row four-point-contact component designed to accommodate combined radial and axial loads in Compact rotating assemblies. It operates in high-speed applications where precise contact geometry and controlled internal clearance are required, and it is supplied with an open end and a parallel bore for direct shaft mounting.
Features and Benefits:
• 30000 r/min limiting speed enables high-speed operation
• C2 internal clearance improves axial stiffness under load
• 35° contact angle provides enhanced axial load capacity
• Machined metal cage maintains ball spacing at high rpm
• Steel balls deliver consistent rolling-contact performance
• 17 kN dynamic rating supports substantial operational loads
• C2 internal clearance improves axial stiffness under load
• 35° contact angle provides enhanced axial load capacity
• Machined metal cage maintains ball spacing at high rpm
• Steel balls deliver consistent rolling-contact performance
• 17 kN dynamic rating supports substantial operational loads
Applications
• Suitable for Compact motor spindle assemblies
• Ideal for precision rotary indexing units
• Used with small gearbox shafts requiring axial load support
• Can be used for high-speed pump rotor bearings
• Used for combined radial and axial load-bearing shafts
• Ideal for precision rotary indexing units
• Used with small gearbox shafts requiring axial load support
• Can be used for high-speed pump rotor bearings
• Used for combined radial and axial load-bearing shafts
What mounting configuration does it require?
It fits directly onto a shaft with a parallel bore and open end for straightforward axial positioning.
How does the bearing handle axial forces in both directions?
The four-point-contact layout shares axial loads through a 35° contact angle to sustain thrust in either direction.
What material considerations affect wear resistance?
The rolling elements are steel balls combined with a machined metal cage to preserve rolling contact under cyclic loads.
How should operating speed be managed relative to ratings?
Maintain rotational speed at or below 30 000 r/min to align with the specified limiting speed and preserve service life.
관련된 링크들
- SKF QJ 305 MA/C2L 1 Row Ball Bearing - 25 mm ID, 62 mm OD 17 mm Race Width
- SKF QJ 207 N2MA/C2L 1 Row Ball Bearing - 35 mm ID, 72 mm OD 17 mm Race Width
- SKF QJ 212 1 Row Ball Bearing - 60 mm ID, 110 mm OD 22 mm Race Width
- SKF QJ 211 MA 1 Row Ball Bearing - 55 mm ID, 100 mm OD 21 mm Race Width
- SKF QJ 209 MA 1 Row Ball Bearing - 45 mm ID, 85 mm OD 19 mm Race Width
- SKF QJ 215 MA 1 Row Ball Bearing - 75 mm ID, 130 mm OD 25 mm Race Width
- SKF QJ 213 MA 1 Row Ball Bearing - 65 mm ID, 120 mm OD 23 mm Race Width
- SKF QJ 210 MA 1 Row Ball Bearing - 50 mm ID, 90 mm OD 20 mm Race Width