SKF 6315-2RS1/C3 1 Row Ball Bearing - 75 mm ID, 160 mm OD

This ball bearing is a sealed single-row deep-groove unit designed to support rotating shafts in industrial assemblies where axial and radial loads occur concurrently. It is intended for continuous operation at moderate speeds and offers a sealed configuration to reduce contamination risk in demanding environments.

• Sealed construction reduces lubricant loss and contamination ingress
• Steel races provide high structural durability under load
• Sheet metal cage ensures stable rolling element separation
• C3 internal clearance permits thermal expansion without binding
• High dynamic capacity enables extended service under fluctuating loads
• Limiting speed supports operations up to specified rotational rates

• Suitable for electric motor shaft support in manufacturing equipment
• Ideal for gearbox output shafts under varying load conditions
• Used with conveyor rollers in material handling systems
• Can be used for pump drives requiring sealed bearings
• Suitable for industrial fans operating at moderate rotational speeds

The races and balls are MADE from steel while the separator is formed from sheet metal.

The increased internal clearance accommodates dimensional growth during temperature rises to prevent seizure.

The sealed configuration minimises ingress of dust and moisture and helps retain lubricant within the bearing.

The sheet metal cage maintains ball spacing under load and reduces fretting, which can extend periods between re-greasing.