FAG 6003-2RSR 1 Row Ball Bearing - 17 mm ID, 35 mm OD

This ball bearing, designed by Schaeffler, is a single row deep groove model ideal for various industrial applications. With an inner diameter of 17mm and outer diameter of 35mm, this high-performance component features a race width of 10mm, ensuring robust operation under dynamic loads. Both sides are sealed, enhancing durability and longevity by preventing contaminants from entering the bearing.

• Sealed on both sides to keep out contaminants

• Used in electric motors for improved efficiency

The ball bearing is made from steel, which offers strength and withstands heavy use. The use of steel in both the ball and cage ensures high durability and performance under load, making it suitable for demanding operations.

The sealed design prevents dirt and debris from entering the bearing, which significantly extends its service life and minimises maintenance requirements. This feature is crucial for maintaining operational efficiency in environments prone to contamination.

The static load rating of 3.25 kN and dynamic load rating of 6.4 kN indicate its capability to support varying loads effectively. This makes it suitable for applications where load conditions may change frequently, ensuring consistent performance.

FAG from Schaeffler deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products are of simple design, durable in operation and easy to maintain. They are available in single and double row designs and in open and sealed variants. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields.

• Low noise levels;• Improved sealing;• Lower friction;• Cost-effective

Open bearings are suitable for high speeds. Due to the manufacturing process, they have turned recesses for sealing washers and sealing shields.

2Z - Gap seals on both sides. These bearings are greased using a high-quality grease, lubricated for life and suitable for high speeds;2HRS - Lip seals on both sides made from nitrile butadiene rubber. These bearings have an improved sealing function and retention in the outer ring. They are greased using a high-quality grease, lubricated for life and suitable for moderate speeds;2BRS - Non-contact seals on both sides. Their friction level is as low as with the gap seals. In addition, they offer better protection against the ingress of dust and the escape of lubricant;2RSR - Lip seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds;C - Modified internal construction in Generation C