SKF 53306 1 Row Ball Bearing - 30 mm ID, 60 mm OD

This ball bearing is a single-direction thrust component designed to absorb axial loads in rotating assemblies where thrust capacity is required. It is constructed from bearing steel for load-bearing surfaces and intended for installations that require controlled axial positioning and rotational capability within moderate speed limits.

• 65.5 kN static load rating provides high axial holding capacity
• 35.8 kN dynamic load rating supports sustained axial motion under load
• Sheet-metal cage reduces mass and limits friction during operation
• Normal internal clearance ensures predictable axial play and preload control
• Ground bore ensures accurate seating for concentric assemblies
• 5300 r/min limiting speed accommodates medium-speed applications

• Suitable for axial load support in vertical-shaft equipment
• Ideal for thrust-bearing stages in gearboxes and reducers
• Used with clutches and thrust collars requiring axial restraint
• Can be used for axial positioning in machine-tool fixtures
• Suitable for assembly in rotating conveyors with axial loads

The rolling contacts and raceways are manufactured from bearing steel.

The sheet-metal cage lowers rotating mass and stabilises ball spacing at speed.

It is supplied with normal internal clearance to permit controlled axial movement without excessive end float.

The bore is ground to achieve a precise fit and concentric seating.

The limiting speed is 5300 r/min, which defines the maximum advised rotational rate.