Subtotal (1 unit)*
₩226,460.00
재고있음
- 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩226,460.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 312-509
- 제조사 부품 번호:
- 51122
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 110mm | |
| Outside Diameter | 145mm | |
| Race Width | 25mm | |
| Cage Material | Steel Sheet Metal | |
| End Type | Open | |
| Static Load Rating | 290000N | |
| Dynamic Load Rating | 87000N | |
| Standards/Approvals | ISO 492:2023 | |
| Series | 511 | |
| Limiting Speed | 3350rpm | |
| Bearing Type | Axial Deep Groove | |
| Flange Outside Diameter | 145mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 110mm | ||
Outside Diameter 145mm | ||
Race Width 25mm | ||
Cage Material Steel Sheet Metal | ||
End Type Open | ||
Static Load Rating 290000N | ||
Dynamic Load Rating 87000N | ||
Standards/Approvals ISO 492:2023 | ||
Series 511 | ||
Limiting Speed 3350rpm | ||
Bearing Type Axial Deep Groove | ||
Flange Outside Diameter 145mm | ||
제외
- COO (Country of Origin):
- CZ
Schaeffler 511 Series Deep Groove Ball Bearing, 145mm Outside Diameter, 110mm Inside Diameter - 51122
This deep groove ball bearing is designed to manage combined radial and axial loads in rotating assemblies where an open-end configuration is required. It suits applications demanding defined speed limits and standardised tolerances, and is intended for environments where a sheet-metal cage and flange Interface are necessary. The component meets contemporary dimensional standards for interchangeability.
Features and Benefits:
• 87000 N dynamic load capacity provides sustained operational thrust
• 290000 N static load capacity resists high standstill forces
• 3350 r/min limiting speed allows predictable rotational performance
• Steel sheet-metal cage reduces component thickness while guiding rollers
• Flanged outer profile gives stable axial location
• 290000 N static load capacity resists high standstill forces
• 3350 r/min limiting speed allows predictable rotational performance
• Steel sheet-metal cage reduces component thickness while guiding rollers
• Flanged outer profile gives stable axial location
Applications
• Suitable for rotating shafts with axial load components
• Used with flanged housings requiring precise outside diameter
• Ideal for assemblies needing an open-ended bearing arrangement
• Can be used for medium-speed drives with high static loads
• Used for machinery where metal-cage retention is preferred
• Used with flanged housings requiring precise outside diameter
• Ideal for assemblies needing an open-ended bearing arrangement
• Can be used for medium-speed drives with high static loads
• Used for machinery where metal-cage retention is preferred
What axial positioning does the flange provide?
The flange on the outer ring defines the bearing’s external stopping surface for axial location against a mating housing.
How does the open end configuration affect lubricant access?
The open end permits direct lubricant application and Visual inspection without disassembly.
What material composes the cage and why is it chosen?
The cage is formed from steel sheet metal to provide thin-section retention and withstand contact stresses.
Which standard governs dimensional tolerances for this component?
Dimensional and tolerance requirements conform to ISO 492:2023.
How does speed limitation influence installation decisions?
The 3350 r/min limiting speed should be considered when selecting for drives approaching that rotational rate to avoid performance degradation.
관련된 링크들
- NTN 51122 Ball Bearing - 110 mm ID, 145 mm OD
- FAG 16019 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- SKF 51122 1 Row Thrust Ball Bearing - 110 mm ID, 145 mm OD
- FAG 6019-C3 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- FAG 6019-2RSR 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- FAG 6019-2Z 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- FAG 16019-C3 1 Row Deep Groove Ball Bearing - 95 mm ID, 145 mm OD
- FAG 16014 1 Row Deep Groove Ball Bearing - 70 mm ID, 110 mm OD