FAG 61805-HLC 1 Row Deep Groove Ball Bearing - 25 mm ID, 37 mm OD
- RS 제품 번호:
- 310-926
- 제조사 부품 번호:
- 61805-HLC
- 제조업체:
- FAG
Subtotal (1 unit)*
₩27,660.00
제조사가 재고 비축중
- 2026년 12월 17일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩27,660.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 310-926
- 제조사 부품 번호:
- 61805-HLC
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 25mm | |
| Outside Diameter | 37mm | |
| Race Width | 7mm | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 2940N | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 4300N | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 28000rpm | |
| Bearing Type | Deep Groove | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 25mm | ||
Outside Diameter 37mm | ||
Race Width 7mm | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 2940N | ||
Internal Clearance CN | ||
Dynamic Load Rating 4300N | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 28000rpm | ||
Bearing Type Deep Groove | ||
- COO (Country of Origin):
- JP
Schaeffler 618 Series Deep Groove Ball Bearing, 25mm Bore, 37mm Outside Diameter - 61805-HLC
This deep groove ball bearing is a single-row radial bearing designed for high-speed rotary applications where an open end and cylindrical bore are required. It is suited to environments demanding compact, low-friction rolling elements and operates across a wide speed range while handling combined radial and axial loads in both directions.
Features and Benefits:
• Steel cage construction enhances durability and maintains ball spacing
• 4300 N dynamic load capacity improves operational load handling
• 2940 N static load capacity supports sustained stationary loads
• CN internal clearance reduces axial play for controlled shaft movement
• 28,000 r/min limiting speed enables high-speed rotational performance
• 4300 N dynamic load capacity improves operational load handling
• 2940 N static load capacity supports sustained stationary loads
• CN internal clearance reduces axial play for controlled shaft movement
• 28,000 r/min limiting speed enables high-speed rotational performance
Applications
• Suitable for precision motor spindles operating at high speeds
• Used with small gearboxes requiring radial and axial load support
• Ideal for pump shafts demanding continuous rotation
• Can be used for small electric motor rotor support
• Used for handheld tool bearings needing a Compact form factor
• Used with small gearboxes requiring radial and axial load support
• Ideal for pump shafts demanding continuous rotation
• Can be used for small electric motor rotor support
• Used for handheld tool bearings needing a Compact form factor
What is the bore type and how does it affect mounting?
It has a cylindrical bore which permits press-fit or sleeve-mounted installation depending on shaft preparation.
How does the cage material influence maintenance intervals?
The steel cage offers dimensional stability and wear resistance that can extend service life with proper lubrication.
What operating behaviour should be expected at maximum speed?
At 28,000 r/min the bearing performs with reduced internal friction but requires appropriate lubrication to manage heat generation.
How does number of rows affect load transmission?
Being a single-row design, it transmits loads through one raceway pair, offering simplicity and Compact axial/radial load handling.
관련된 링크들
- FAG 61805-2Z-HLC 1 Row Deep Groove Ball Bearing - 25 mm ID, 37 mm OD
- FAG 61904-HLC 1 Row Deep Groove Ball Bearing - 20 mm ID, 37 mm OD
- FAG 61805-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 37 mm OD
- FAG 61808-HLC 1 Row Deep Groove Ball Bearing - 40 mm ID, 52 mm OD
- FAG 61905-HLC 1 Row Deep Groove Ball Bearing - 25 mm ID, 42 mm OD
- FAG 61806-HLC 1 Row Deep Groove Ball Bearing - 30 mm ID, 42 mm OD
- FAG 61807-HLC 1 Row Deep Groove Ball Bearing - 35 mm ID, 47 mm OD
- FAG 61802-HLC 1 Row Deep Groove Ball Bearing - 15 mm ID, 24 mm OD