제조사부품번호

ABB Auxiliary Contact, 2 Contact, 1 NO/1 NC, Cat4, Front, 6 A, 690V ac, 1SBN010151R1011 CAT4-11E

RS 제품 번호:: 711-6339
제조사 부품 번호:: 1SBN010151R1011 CAT4-11E
제조업체:: ABB

ABB Auxiliary Contact, 2 Contact, 1 NO/1 NC, Cat4, Front, 6 A, 690V ac, 1SBN010151R1011 CAT4-11E

모든 Auxiliary Contacts 열람하기

Subtotal (1 unit)*

₩25,260.00

재고있음

13 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩25,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 711-6339
제조사 부품 번호:: 1SBN010151R1011 CAT4-11E
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Number of Contacts	2
	Product Type	Auxiliary Contact
	Normal State Configuration	1 NO/1 NC
	Series	Cat4
	Mount Type	Front
	Contact Current	6A
	Terminal Type	Screw
	Pole and Throw Configuration	2P
	Contact Voltage	690V ac
	Operational Current Ie	6A
	Mechanical Durability	10Mcycles
	Rated Insulation Voltage Ui	690V
	Mounting Location	Front Side
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	NEMA, UL/CSA, IEC

	모두 선택
	브랜드 ABB
	Number of Contacts 2
	Product Type Auxiliary Contact
	Normal State Configuration 1 NO/1 NC
	Series Cat4
	Mount Type Front
	Contact Current 6A
	Terminal Type Screw
	Pole and Throw Configuration 2P
	Contact Voltage 690V ac
	Operational Current Ie 6A
	Mechanical Durability 10Mcycles
	Rated Insulation Voltage Ui 690V
	Mounting Location Front Side
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 60°C
	Standards/Approvals NEMA, UL/CSA, IEC

ABB Series AF Auxiliary Contact, 6A Contact Current, 690V Contact Voltage - 1SBN010151R1011 CAT4-11E

This auxiliary contact provides a Compact 2-pole front-mounted switching Interface designed for integration with AF contactors in industrial control systems. It offers instantaneous changeover functionality with both one normally open and one normally closed contact, and front-facing screw terminals for straightforward wiring. The unit is specified for auxiliary circuits up to 690V and is intended for standard industrial environments where an add-on contact Block is required.

Features & Benefits

• 6A operational current gives reliable control signalling
• 690V rated insulation supports high-voltage auxiliary circuits
• 10M cycles mechanical durability reduces maintenance frequency
• Front-mount screw terminals enable Rapid installation
• Operates from −40°C to 60°C for wide ambient ranges
• IEC, UL and CSA compliance ensures recognised design standards

Applications

• Suitable for status feedback on AF contactors in switchboards
• Ideal for control-panel interlocking and safety circuits
• Used with motor starters to signal auxiliary conditions
• Can be used for PLC input signalling in automation racks
• Suitable for retrofit replacement in AF series assemblies

What Terminal types are provided for conductor connection?

Connections are MADE via screw terminals that accept a range of flexible and rigid conductor sizes including ferrules to match typical control wiring practices.

Which contact arrangement is available and how does it behave?

It contains one normally open and one normally closed instantaneous contact, providing complementary signalling outputs for control systems.

How does the device cope with short transient stresses?

The unit has a rated impulse withstand of 6kV and defined short-time withstand currents for brief fault conditions.

What conductor cross-sections are supported for wiring?

The Block accepts flexible and rigid conductors from 0.75mm² up to 2.5mm², with specific ferrule configurations for multi-core terminations.

How is mechanical mounting handled in existing contactor setups?

The contact Block is designed for front-side mounting so it mates directly with compatible AF contactor housings.

Standards

UL 508, CSA C22.2 N14