제조사부품번호

ABB Auxiliary Contact, 1 Contact, 1 NO, EF14, Front, 6 A, 690V ac, 1SBN010111R1010 CC4-10

RS 제품 번호:: 711-6332
제조사 부품 번호:: 1SBN010111R1010 CC4-10
제조업체:: ABB

ABB Auxiliary Contact, 1 Contact, 1 NO, EF14, Front, 6 A, 690V ac, 1SBN010111R1010 CC4-10

모든 Auxiliary Contacts 열람하기

Subtotal (1 unit)*

₩35,540.00

재고있음

17 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩35,540.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 711-6332
제조사 부품 번호:: 1SBN010111R1010 CC4-10
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Auxiliary Contact
	Number of Contacts	1
	Normal State Configuration	1 NO
	Series	EF14
	Mount Type	Front
	Contact Current	6A
	Terminal Type	Screw
	Pole and Throw Configuration	1P
	Contact Voltage	690V ac
	Mounting Location	Front Side
	Operational Current Ie	6A
	Rated Insulation Voltage Ui	690V
	Minimum Operating Temperature	-40°C
	Mechanical Durability	10Mcycles
	Maximum Operating Temperature	70°C
	Standards/Approvals	No

	모두 선택
	브랜드 ABB
	Product Type Auxiliary Contact
	Number of Contacts 1
	Normal State Configuration 1 NO
	Series EF14
	Mount Type Front
	Contact Current 6A
	Terminal Type Screw
	Pole and Throw Configuration 1P
	Contact Voltage 690V ac
	Mounting Location Front Side
	Operational Current Ie 6A
	Rated Insulation Voltage Ui 690V
	Minimum Operating Temperature -40°C
	Mechanical Durability 10Mcycles
	Maximum Operating Temperature 70°C
	Standards/Approvals No

ABB EF14 Series Auxiliary Contact, 6A Contact Current, 690V Contact Voltage - 1SBN010111R1010 CC4-10

This auxiliary contact is a front-mounted, single-pole leading contact Block designed to extend control circuits in industrial contactor and relay assemblies. It connects via screw terminals and is intended for use in standard industrial environments where a normally open contact is required to signal or interlock auxiliary functions.

Features & Benefits

• 6A rated current for Compact control-circuit switching
• 690V insulation rating for high-voltage auxiliary circuits
• Mechanical endurance 10M cycles to reduce maintenance frequency
• Operates from -40°C to 70°C for a wide ambient range
• Screw terminals support up to 2.5 mm² conductor sizes
• 1NO configuration simplifies wiring for single-function schemes

Applications

• Suitable for front-side mounting on AF and NF contactors
• Ideal for signalling circuits in motor control panels
• Used with contactor relays to provide leading-contact feedback
• Can be used for auxiliary interlocks in industrial automation

What Terminal types and conductor sizes are supported?

Connections use screw terminals compatible with rigid or flexi ble conductors up to 2.5 mm², including insulated ferrules as specified for proper electrical contact.

How does the device handle short-time current stresses?

It withstands short-time currents with rated short-time withstand capacities and specified Peak values for 0.1 s and 1 s impulses, suitable for typical contactor switching transients.

What switching frequency can be expected in demanding operations?

The unit is specified for high mechanical and electrical switching frequencies with separate limits for electrical duty and mechanical cycles, enabling frequent operations in control applications.

Which mounting orientation is required for installation?

The Block is designed for front placement on compatible contactor frames, ensuring correct mechanical engagement and electrical alignment.

Standards

UL 508, CSA C22.2 N14