제조사부품번호

ABB Auxiliary Contact, 2 Contact, 2 NO, CAF6-20M, Front, 6 A, 240 V dc, 500V ac, GJL1201330R0007 CAF6-20M

RS 제품 번호:: 445-8273
제조사 부품 번호:: GJL1201330R0007 CAF6-20M
제조업체:: ABB

ABB Auxiliary Contact, 2 Contact, 2 NO, CAF6-20M, Front, 6 A, 240 V dc, 500V ac, GJL1201330R0007 CAF6-20M

모든 Auxiliary Contacts 열람하기

Subtotal (1 unit)*

₩14,490.45

재고있음

10 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩14,490.45

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 445-8273
제조사 부품 번호:: GJL1201330R0007 CAF6-20M
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Number of Contacts	2
	Product Type	Auxiliary Contact
	Normal State Configuration	2 NO
	Series	CAF6-20M
	Contact Current	6A
	Mount Type	Front
	Terminal Type	Screw
	Pole and Throw Configuration	2P
	Contact Voltage	240, 500V dc
	Minimum Operating Temperature	-25°C
	Mounting Location	Front Side
	Operational Current Ie	4A
	Rated Insulation Voltage Ui	690V
	Maximum Operating Temperature	55°C
	Standards/Approvals	IEC/EN 60947-5-1, UL 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, IEC/EN 60947-1

	모두 선택
	브랜드 ABB
	Number of Contacts 2
	Product Type Auxiliary Contact
	Normal State Configuration 2 NO
	Series CAF6-20M
	Contact Current 6A
	Mount Type Front
	Terminal Type Screw
	Pole and Throw Configuration 2P
	Contact Voltage 240, 500V dc
	Minimum Operating Temperature -25°C
	Mounting Location Front Side
	Operational Current Ie 4A
	Rated Insulation Voltage Ui 690V
	Maximum Operating Temperature 55°C
	Standards/Approvals IEC/EN 60947-5-1, UL 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, IEC/EN 60947-1

제외

COO (Country of Origin):: DE

ABB CAF6-20M Series Auxiliary Contact, 6A Contact Current, 690V Rated Insulation Voltage - GJL1201330R0007 CAF6-20M

This auxiliary contact is a front-mount add-on designed to provide two normally open auxiliary contacts for control and signalling tasks in electrical installations. It connects directly to compatible mini contactors to extend switching logic and status feedback in automation and electrical panels, operating across DC and AC auxiliary circuits.

Features & Benefits

• 2NO 2P configuration delivers simple contact expansion
• Rated insulation 690V ensures high-voltage separation
• Operational current 4A enables reliable control-circuit switching
• Conventional thermal current 6A supports steady auxiliary loads
• Screw terminals provide secure conductor fixation
• Tightening torque 0.8 to 1.1N·m gives consistent contact pressure

Applications

• Suitable for extending control contacts on mini contactors
• Used with motor control circuits requiring front-mounted auxiliaries
• Ideal for status signalling to PLCs and monitoring equipment
• Suitable for retrofit auxiliary functionality in distribution panels
• Used for interlock logic in machine-control cabinets

What wire sizes can be terminated into the contact block?

The terminals accept flexible conductors with ferrules 1/2x1 to 2.5mm², flexible conductors 1/2x1 to 2.5mm² and rigid conductors 1/2x1 to 4mm².

What environmental limits should be observed during installation?

The unit is rated for operation between -25 to +55°C and may be stored between -40 to +80°C

maximum operating altitude is 2000 m.

Which electrical standards does it conform to for industrial use?

It meets IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 and corresponding UL equivalents.

How does the product perform under mechanical stress?

It withstands shock pulses of 11 MS at 15 g and vibration levels of 5 g across 5 to 150 Hz as per IEC 60068 tests.

What torque and stripping preparations are required for reliable connections?

Use a torque of 0.8 to 1.1 N·m and a wire stripping length of 9mm for proper termination.