제조사부품번호

ABB Auxiliary Contact Block, 4 Contact, 4 NO, 1SBN01, Front, 4 A, 690V, 1SBN010042R1240

RS 제품 번호:: 259-6031
제조사 부품 번호:: 1SBN010042R1240
제조업체:: ABB

ABB Auxiliary Contact Block, 4 Contact, 4 NO, 1SBN01, Front, 4 A, 690V, 1SBN010042R1240

모든 Auxiliary Contacts 열람하기

Subtotal (1 Box of 2 units)*

₩129,460.00

제조사가 재고 비축중

2026년 11월 06일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Box(es)	Per Box	한팩당*
1 +	₩129,460.00	₩64,730.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 259-6031
제조사 부품 번호:: 1SBN010042R1240
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Number of Contacts	4
	Product Type	Auxiliary Contact Block
	Normal State Configuration	4 NO
	Series	1SBN01
	Contact Current	4A
	Mount Type	Front
	Terminal Type	Screw
	Pole and Throw Configuration	4P
	Contact Voltage	690V
	Operational Current Ie	2A
	Rated Insulation Voltage Ui	690V
	Mounting Location	Front
	Standards/Approvals	IEC 60529, EN 60529, IEC 60947-1, EU Directive 2011/65/EU

	모두 선택
	브랜드 ABB
	Number of Contacts 4
	Product Type Auxiliary Contact Block
	Normal State Configuration 4 NO
	Series 1SBN01
	Contact Current 4A
	Mount Type Front
	Terminal Type Screw
	Pole and Throw Configuration 4P
	Contact Voltage 690V
	Operational Current Ie 2A
	Rated Insulation Voltage Ui 690V
	Mounting Location Front
	Standards/Approvals IEC 60529, EN 60529, IEC 60947-1, EU Directive 2011/65/EU

Datasheet - 1SBN010042R1240

COO (Country of Origin):: CZ

ABB 1SBN01 Series Auxiliary Contact Block, 4 NO Normal State Configuration, 4A Contact Current - 1SBN010042R1240

This auxiliary contact Block is an add-on switching device designed to extend the signalling and control capability of contactors in industrial electrical panels. It mounts to the front of compatible gear and provides additional changeover contacts for monitoring and interlocking tasks within automation and electrical systems.

Features and Benefits:

• Four normally open contacts providing expanded control capacity
• Screw Terminal connections allowing secure conductor attachment
• Rated for switching up to 4A to handle signalling loads
• Insulation rated to 690V for high-voltage separation requirements
• Front mounting for straightforward installation on contactors
• Complies with IEC and EN enclosure and switchgear standards

Applications

• Suitable for status feedback to PLCs and control systems
• Ideal for interlock circuits in motor control centres
• Used with contactors to increase auxiliary contact count
• Can be used for alarm or indication circuits in switchgear
• Suitable for retrofit additions on front-mounted control assemblies

What is the appropriate use for the block’s current capability?

It is intended for small switching and signalling duties where contact currents do not exceed 4 A and where control circuits require low-power switching.

How is the component secured electrically to the control wiring?

Electrical connections are MADE via threaded screw terminals that ensure a clamp-type contact on conductors for consistent electrical continuity.

What operational current should be considered for persistent switching?

Continuous operational considerations should be based around a typical operational current rating of 2 A for repeated actuation cycles.

Which environmental protection and standardisation parameters does it meet?

The device aligns with international enclosure and low-voltage switchgear standards including IEC 60529 and IEC 60947-1 as well as the relevant EN directive for ingress classification.

How many poles does the unit provide and how does that affect circuit design?

It provides four poles, enabling independent switching of up to four separate circuits for expanded control or signalling functionality.