제조사부품번호

ABB Auxiliary Contact Block, 4 Contact, 3 NO/1 NC, 1SBN01, Front, 4 A, 690V, 1SBN010042R1131

RS 제품 번호:: 259-6030
제조사 부품 번호:: 1SBN010042R1131
제조업체:: ABB

ABB Auxiliary Contact Block, 4 Contact, 3 NO/1 NC, 1SBN01, Front, 4 A, 690V, 1SBN010042R1131

모든 Auxiliary Contacts 열람하기

Subtotal (1 Box of 2 units)*

₩127,794.00

재고있음

추가로 2026년 8월 24일 부터 2 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Box(es)	Per Box	한팩당*
1 +	₩127,794.00	₩63,896.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 259-6030
제조사 부품 번호:: 1SBN010042R1131
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Auxiliary Contact Block
	Number of Contacts	4
	Normal State Configuration	3 NO/1 NC
	Series	1SBN01
	Mount Type	Front
	Contact Current	4A
	Terminal Type	Screw
	Pole and Throw Configuration	4P
	Contact Voltage	690V
	Operational Current Ie	2A
	Mounting Location	Front
	Rated Insulation Voltage Ui	690V
	Standards/Approvals	EN 60529, acc. to IEC 60529, IEC 60947-1

	모두 선택
	브랜드 ABB
	Product Type Auxiliary Contact Block
	Number of Contacts 4
	Normal State Configuration 3 NO/1 NC
	Series 1SBN01
	Mount Type Front
	Contact Current 4A
	Terminal Type Screw
	Pole and Throw Configuration 4P
	Contact Voltage 690V
	Operational Current Ie 2A
	Mounting Location Front
	Rated Insulation Voltage Ui 690V
	Standards/Approvals EN 60529, acc. to IEC 60529, IEC 60947-1

Datasheet - 1SBN010042R1131

COO (Country of Origin):: CZ

ABB 1SBN01 Series Auxiliary Contact Block, 4A Contact Current, Front Mount Type - 1SBN010042R1131

This auxiliary contact Block provides additional switching contacts for control circuits, designed for front mounting on contactors and similar devices. It offers a mix of normally open and normally closed contacts to extend signalling and interlock functions within automation and electrical installations, complying with recognised ingress and switchgear standards for industrial environments.

Features and Benefits:

• 3NO1NC contact arrangement enables versatile signalling options
• Four-pole configuration supports multi-circuit switching
• 4A contact rating permits low-power control loads
• 690V rated insulation suits high-voltage control circuits
• Screw terminals allow secure, conventional wiring connections
• Front-mount design simplifies retrofitting and panel access

Applications

• Suitable for extending contactor signalling in motor control panels
• Ideal for interlock functions in automation assemblies
• Used with control relays requiring additional auxiliary contacts
• Can be used for status feedback in electrical distribution gear
• Useful in retrofits where front-mounted accessories are required

What is the electrical endurance for frequent switching applications?

The contact Block is rated for continuous insulation at 690V and a contact current of 4A, making it appropriate for repetitive low-power control operations under specified switching cycles.

How is the unit attached to a primary device in an installation?

It is designed for front mounting, enabling direct attachment at the front of compatible contactors to add auxiliary contacts without altering the main device footprint.

Which standards relate to its environmental protection and switchgear compatibility?

It meets the referenced EN 60529 for ingress considerations and is specified in accordance with IEC 60947-1 for low-voltage switchgear requirements.

What Terminal type should installers expect when wiring control circuits?

Connections are MADE via screw terminals, permitting orthodox conductor termination and straightforward on-site wiring.

How many separate electrical circuits can be controlled simultaneously?

The Block provides four contacts in total, arranged to handle multiple signalling or interlock circuits in a Compact accessory.