SMC Compressed Air Pipe Blue Polyurethane 8 mm 500 m TU Series, TU0805

모든 Air Hoses 열람하기

Subtotal (1 unit)*

₩1,563,471.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 5월 19일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,563,471.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
366-601
제조사 부품 번호:
TU0805BU-500
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Compressed Air Pipe

Colour

Blue

Material

Polyurethane

Length

500m

Maximum Operating Pressure

0.8 Mpa

Series

TU

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Inside Diameter

5mm

Outside Diameter

8mm

Standards/Approvals

RoHS

Model Number

TU0805

SMC Series TU Compressed Air Pipe, 5mm Inside Diameter, 500m Length - TU0805BU-500


This compressed Air pipe is a blue polyurethane tubing designed for pneumatic conveyance in industrial environments. It facilitates Air distribution for automated systems and mechanical equipment while withstanding typical workshop temperature ranges and moderate pressure demands. The product is supplied as a continuous roll for extended runs and routine installations.

Features & Benefits


• Maximum operating pressure 0.8MPa provides dependable service life
• Operating temperature range -20°C to 60°C supports varied environments
• Polyurethane construction gives high flexibility and abrasion resistance
• RoHS compliance ensures suitability for regulated assemblies
• 500m length roll minimises jointing and reduces installation interruptions

**Applications**


• Suitable for pneumatic actuators and valve control lines in automation
• Ideal for instrument Air distribution in electronics assembly areas
• Used with Air tools and blow‑off stations in mechanical workshops
• Can be used for compressed Air mains in electrical panel enclosures

What is the tube’s dimensional profile for routing in Compact assemblies?


The hose has a 5mm internal bore and an 8mm external diameter, allowing tight bends while maintaining flow capacity for small‑bore pneumatic circuits.

How does the material choice affect wear and flexing in dynamic installations?


Polyurethane offers superior flex‑fatigue resistance compared with rigid polymers, enabling long runs on moving parts and frequent bending without Rapid degradation.

How does the product format impact installation efficiency on site?


A 500 m continuous roll reduces the number of couplings required, cutting potential leak points and speeding up long‑distance deployments.

Are there thermal limits for use near heat‑generating equipment?


The tubing is rated to 60°C maximum, so it should be routed away from elements exceeding that temperature to prevent softening or deformation.

관련된 링크들