Power Integrations, AC/DC Converter 2.5 A, 12 V dc 6-Pin, eSIP-7C

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 AC-DC Converters 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 48 units)*

₩98,373.60

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 7월 22일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
Per Tube*
48 - 48₩2,049.45₩98,400.90
96 - 144₩1,989.00₩95,452.50
192 +₩1,928.55₩92,589.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-2467
제조사 부품 번호:
LNK6777E
제조업체:
Power Integrations
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Power Integrations

Product Type

AC/DC Converter

Maximum Input Voltage

265V ac

Maximum Output Voltage

12V dc

Output Power

15W

Mount Type

Through Hole

Pin Count

6

Switching Frequency

32kHz

Maximum Output Current

2.5A

Package Type

eSIP-7C

Minimum Input Voltage

85V ac

Topology

Flyback

Minimum Operating Temperature

-40°C

Maximum Duty Cycle

66%

Maximum Operating Temperature

150°C

Height

8.25mm

Length

10.24mm

Standards/Approvals

No

Series

LinkSwitch-HP

Automotive Standard

No

Supply Current

1.3mA

COO (Country of Origin):
CN

LinkSwitch-HP series Offline AC-DC Converters


The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.

Package options:

• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad

• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported

• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink

• Multi-mode control maximizes efficiency over full load range

• No-load consumption below 30 mW at 230 VAC

• >75% efficiency with 1 W input at 230 VAC

• >50% efficiency with 0.1 W input at 230 VAC

• Dramatically simplifies power supply designs

• Eliminates opto-coupler and all secondary control circuitry

• ±5% or better output voltage tolerance

• 132 kHz operation reduces transformer and power supply size

• Compensation over line limits overload power

• Frequency jittering reduces EMI filter cost

• Fully integrated soft-start for minimum start-up stress

• Auto-restart limits power delivery to 3% during overload faults

AC-DC Converters, Power Integrations


관련된 링크들