Ultimaker Nozzle Olsson Block Kit for use with Ultimaker 2

모든 3D Printer Parts 열람하기

Subtotal (1 unit)*

₩258,726.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩258,726.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
110-1981
제조사 부품 번호:
OBK001
제조업체:
Ultimaker
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Ultimaker

Product Type

Nozzle

Sub Type

Olsson Block Kit

For Use With

Ultimaker 2

Nozzle Material

Brass

Standards/Approvals

No

제외

COO (Country of Origin):
NL

Ultimaker 3D Olsson Block Printing Parts & Accessoriess


The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. A larger nozzle is suitable for faster printing, while a smaller nozzle can be used to create more detailed prints.

Note:

Use of a torque wrench with the socket is not required but highly recommended to install nozzles without over-tightening. If a torque wrench is available for use with the socket during installation, please set it to a force between 1 and 1.5Nm. Take care not to set the force higher than 2Nm, as the nozzle could break off inside the block.

Supplied with:

Olsson block comes with 4 nozzles in various sizes (0.25mm, 0.40mm, 0.60mm and 0.80mm), a screwdriver and a socket.

Features and Benefits


Filaments are available in different sizes and diameters and nozzles always need to be carefully selected

Nozzles or dual nozzles are in constant operation and its wearing risk is increased

Applications


Heated beds

Motor extruders

관련된 링크들