Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm

모든 3D Printer Parts 열람하기

Subtotal (1 unit)*

₩74,275.50

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 43 개 unit(s)이 배송 준비 됨
수량
한팩당
1 +₩74,275.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
110-1982
제조사 부품 번호:
OBN001
제조업체:
Ultimaker
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Ultimaker

Sub Type

Nozzle

Product Type

Nozzle

Nozzle Material

Brass

For Use With

Olsson Block, Ultimaker 2

Nozzle Size

0.25 mm

Standards/Approvals

No

제외

COO (Country of Origin):
NL

Ultimaker 2 Jet Nozzles


The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.

With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.

Use the 0.25mm brass nozzle to print small detailed prints, it's an expert nozzle (RS 110-1982)

The 0.4mm (RS 110-1983) is the standard size for a lot of 3D printers

If you print in wood filaments, this brass nozzle of 0.8mm is perfect for the job (RS 110-1985)

Ultimaker Accessories


Note

This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.

관련된 링크들