Plastic & Rubber Materials

Plastic and rubber materials are available in many forms and are suitable for a range of industrial and commercial applications. The engineering materials are typically used to manufacture mechanical parts to help with vibration, shock, abrasion, corrosion and noise.

Browse through RS extensive range of plastic and rubber materials that will be able to aid you on your engineering and industrial projects. Below describes the range of products we actually stock and supply to our customers.

Types of Rubber Sheeting

  • Natural rubber sheets have superb mechanical qualities They're soft and supple with great resistance to abrasion, corrosion and tearing.
  • Ethylene Polypropylene (EPDM) rubber sheets combine very strong resistance to UV light, ozone and oxidants. Good performance against acids, weak alkalis and brake fluid.
  • Nitrile rubber sheets is a synthetic material that excels in applications where solvents, fuels oils and greases are a factor.
  • Silicone rubber sheets are among the most popular in pharmaceutical and medical environments, due to low permeability and high heat tolerance.
  • Polyethylene rubber sheets are high-density, closed-cell foam products for lightweight strength and buoyancy, Widely used in transport and logistics as protective materials
  • Neoprene rubber sheets Resistant to mineral oils, petroleum products and greases, acids/alkalis. Used in outdoor applications, with a strong performance against weathering, ageing and UV exposure cracking.
  • Fluorocarbon rubber sheets are resistant to mineral oils, fuels, non-polar solvents, including high aromatic and chlorinated types, and ours are chemical-grade at operating temperatures of -18C to +204C.

Plastic Rods, Sheets and Tubes

  • Solid plastic sheets are available in a range of different plastics including Polycarbonate, PVC, Nylon and laminated plastics.
  • Perforated plastic sheets are available with a variety of hole diameters and patterns, considerably lighter and easier to install than metal sheet as well as being more resistant to corrosion.
  • Plastic rods are available in a range of plastics in different lengths, diameters and colours. Plastic rods are used for professional, domestic and hobbyist applications.
  • Round and square plastic tubing is offered in a choice of diameters, densities, hardness and tensile strength ratings, lamination materials, and maximum operating temperatures.

857 표시되는 제품 Plastic & Rubber Materials

1 / 43
재고있음
  • RS 제품 번호 733-6700
Subtotal (1 unit)
₩47,989.50
재고있음
  • RS 제품 번호 588-683
Subtotal (1 pack of 5 units)
₩61,269.00
재고있음
  • RS 제품 번호 840-5541
Subtotal (1 unit)
₩172,068.00
재고있음
  • RS 제품 번호 785-0792
Subtotal (1 lot of 5 units)
₩48,652.50
재고있음
  • RS 제품 번호 408-3829
Subtotal (1 lot of 2 units)
₩123,298.50
재고있음
  • RS 제품 번호 785-0802
Subtotal (1 lot of 5 units)
₩67,606.50
재고있음
  • RS 제품 번호 506-3163
Subtotal (1 unit)
₩26,071.50
재고있음
  • RS 제품 번호 769-8736
Subtotal (1 unit)
₩25,993.50
재고있음
  • RS 제품 번호 733-6725
Subtotal (1 unit)
₩177,547.50
재고있음
  • RS 제품 번호 536-3952
  • 제조사 부품 번호 KAPTON FILM 304X200X0.05MM
Subtotal (1 lot of 5 units)
₩193,791.00
재고있음
  • RS 제품 번호 704-8144
Subtotal (1 unit)
₩256,191.00
재고있음
  • RS 제품 번호 197-0051
Subtotal (1 lot of 1 unit)
₩122,226.00
재고있음
  • RS 제품 번호 205-451
Subtotal (1 unit)
₩363,591.15
재고있음
  • RS 제품 번호 536-3968
  • 제조사 부품 번호 KAPTON FILM 304X200X0.075MM
Subtotal (1 lot of 5 units)
₩226,999.50
재고있음
  • RS 제품 번호 588-684
Subtotal (1 pack of 5 units)
₩81,471.00
재고있음
  • RS 제품 번호 785-0782
Subtotal (1 lot of 5 units)
₩37,342.50
제조사가 재고 비축중
  • RS 제품 번호 273-7126
  • 제조사 부품 번호 PUN-H-10X1,5-TSW-300
Subtotal (1 reel of 300 metres)
₩985,393.50
재고있음
  • RS 제품 번호 536-3946
  • 제조사 부품 번호 KAPTON FILM 304X200X0.025MM
Subtotal (1 lot of 5 units)
₩127,218.00
재고있음
  • RS 제품 번호 506-3090
Subtotal (1 unit)
₩53,742.00
제조사가 재고 비축중
  • RS 제품 번호 714-466
Subtotal (1 unit)
₩334,914.45
페이지 당 결과 수