Microchip ATWINC1500-MR210PB1172 2.7 to 3.6V WiFi Module SPI

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩14,118.80

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 33 개 unit(s)이 배송 준비 됨
수량
한팩당
1 - 4₩14,118.80
5 +₩13,836.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-9620
제조사 부품 번호:
ATWINC1500-MR210PB1172
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Supported Security Standards

WEP, WPA, WPA2

Supported Bus Interfaces

SPI

Supply Voltage

2.7 to 3.6V

Dimensions

21.7 x 14.7 x 2.1mm

Height

2.1mm

Length

21.7mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

14.7mm

COO (Country of Origin):
TW
Microchip's ATWINC1500 is an 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The ATWINC1500 connects to any SAM or PIC MCU with minimal resource requirements. The ATWINC1500's most advanced mode is a single stream 1x1 802.11n mode. The ATWINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI.

Single-band 2.4GHz b/g/n IoT Network Controller
Extreme low power
Operating voltage: 3.0V to 4.2V
Serial host interface: SPI
Security protocols supported: WPA/WPA2 Personal, TLS, SSL
Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
Integrated into Atmel Studio 7 - See ASF release notes
Atmel Software Framework (ASF) Free Software download available
Small form factor module measures just 21.7 x 14.7mm

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들