RS PRO 230V 10 bar Submersible Water Pump, 216L/min

모든 Water Pumps 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩227,097.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 180 개 단위 배송 준비 완료
  • 추가로 2026년 7월 15일 부터 325 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 4₩227,097.00
5 +₩207,655.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
124-1949
Distrelec 제품 번호:
303-90-779
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Submersible Water Pump

Maximum Flow Rate

216L/min

Supply Voltage

230V

Inlet Connection Size

32 mm

Maximum Operating Pressure

10 bar

Body Material

Plastic

Input Power

750W

Maximum Fluid Temperature

35°C

Standards/Approvals

No

IP Rating

IPX8

RS PRO Submersible Water Pumps


Need is the mother of innovation, pushing innovators and creators to make life easier for us all. Water, by nature, moves from an area of high pressure to an area of low pressure. The need to have local drainage becomes a flywheel for French-born inventor to create in 1687 simple, but practical construction, which is the beginning of the new era in Water Pumps.

A Water Pump is a mechanical device that can circulate water or raise it from one level to another. Water Pumps draw existing water into the Pump by suction through an inlet point. The inlet point has a lower rate of pressure than the outlet points. A water pump increases the rate of water to create a vacuum. At this time, the outlet point has a high-pressure level which forces out the water. The impeller plays first fiddle in the entire process as the action of the part increases the fluid's velocity and pressure towards the Pump outlet.

There are a few types of Water Pumps currently available on the market, including Submersible Pumps, Irrigation Pumps and Circulation Pumps. Quite often the categorisation focuses on Self-Priming Pumps, Centrifugal Pumps and Underwater Pumps.

We are proudly introducing our own branded RS PRO Submersible Water Pump with a maximum flow rate of 216 litres per minute, which equals approximately 1300 litres per hour. This high-quality Pump for liquids is ideal for clearing dirty water in general applications. The Pump offers a float switch, which turns on and off automatically with changes to the water level. Our Submersible Water Pump has a comfortable carry handle to operate in the depth of up to 7 meters, meaning a full consent to IPX8 regulations. The body material of plastic can control the maximum fluid temperature around + 35°C, whereas supply voltage is 230 V. The cable length of 10 m with a grain size up to 35 mm is a perfect Pump for flooded basement or rain-soaked foundations.

Features and Benefits


  • This Dirty Water Pump is ideal for general duties

  • Float switch turns the Pump on and off automatically

  • Comfortable carry handle

  • Works perfectly in the depth of up to 7 m (IPX8)

  • Overall size is 22 x 33 x 37 cm

  • Vortex impeller (plastic)

  • 10-meter long cable with the capability of 35 mm grain size to deal with

  • The maximum flow rate of 216 litres per minute (approximately 1300 litres per hour)

  • 3 stepped Adaptor and Elbow (fitting) of 25 mm, 32 mm and 40 mm

    • Applications


  • Residential in case of flooded basement

  • On construction sites

  • Industrial water extraction applications

  • Applies to rain socked foundations or draining containers

  • Works perfectly as Pump for slurries

    • Frequently asked questions


    How long does a Water Pump last?

    On average, the lifetime of the Submersible Pump is approximately 15 years. Having in mind that internal parts are under regular maintenance. Energy consumption represents about 90% of the total life cycle cost.

    What lookout for when using the Water Pump?

  • Avoid overheats as this may damage internal components or cause burns and injuries.

  • Read carefully and follow the manual instruction.

  • Regular Checks (air leaks) and testing to make sure a safe operation is in place.

  • Check for any suction line blockage.

  • Always be cautious and use the Pump as intended, e.g. never operate Pumps in explosive or flammable environments, unless the construction of the Pump can perform such service safely.

    • Why RS PRO?

    RS Pro is our family brand to go-to and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.

    Note

    UK Plug Power Cord

    관련된 링크들