Schneider Electric PanelSeT S3DEX Series Steel Wall Box, IP66, ATEX, 500 mm x 400 mm x 200 mm

Do you need an enclosure with the mettle to withstand tough working conditions? Add this wall box from Schneider Electric to your setup. You can rest assured that its IK10-rated steel body fends off up to 20 joules of impact – the equivalent of a 5kg mass landing on it. This robust assembly is even at home in explosive environments. Simply mount it on your wall and trust it to shield your electronic equipment from harm. A wide 120° door opening angle gives you plenty of elbow room to tinker with the apparatus inside.

• IP66 rating means it's completely dust-tight and resistant to high-pressure water jets from all directions

• Automotive manufacture

The Schneider Electrics triangular lock insert for PanelSet S3D enclosures.

Yes, it has a double bar lock for security. To open or close the lock, just twist the key through a quarter turn.

Along with the enclosure and door, you get a cam lock and a clamped bind nut for the body.

From Schneider Electric this is the Spacial S3DEX steel wall mounting enclosures have a 1 piece folded and welded body with a double plate thickness gutter shaped front profile. The Wall box enclosures are certified for use in ATEX II2 or II3 classifications hazardous areas. This mean that the wall box enclosures can be wall mounted where rare explosion risks are probable.;Spacial S3DEX should be used with other ATEX certified electrical, pneumatic and hydraulic enclosure components. S3DEx wall box enclosures comply with explosion risks in environments charged with gas and dust plus designed for use in group II classified category 2.

The lock is a quarter turn, cam with key.

4 shouldered M8x25 backstuds and 4 crimped blind nuts