Lascar EMV 1200 Series Digital Voltmeter DC, LCD Display 3-Digits ±0.4 %

모든 Voltmeters 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩71,045.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 80 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩71,045.20
5 - 9₩69,278.00
10 +₩67,454.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
867-3066
제조사 부품 번호:
EMV 1200-40
제조업체:
Lascar
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Lascar

Current Type

DC

Number of Digits

3

Display Type

LCD

Cutout Height

12.5mm

Cutout Width

5.5mm

Supply Voltage

3 → 50 V dc

Digit Height

12.5 mm

Meter Accuracy

±0.4 %

Analogue Effect

Digits Only

Minimum Temperature

0°C

Meter Type

Voltmeter

Maximum Temperature

+50°C

Measurement Range

4 → 40V dc

Series

EMV 1200

COO (Country of Origin):
CN

Lascar Digital Voltmeter


The Lascar EMV 1200 series 3-digit digital voltmeter is an easy to mount, LCD, panel meter. This electronic meter has an accuracy of ±0.4%. It can be installed by drilling a single, 5.5mm hole into the panel. The module is fitted to a panel by locating its threaded stud through the hole. Subsequently, the washer is fitted followed by tightening the nut provided along with it. The connecting wires pass through the hollow stud into the target application for connection. Its full-scale reading ranging between 4VDC to 40VDC and supply voltage ranging between 3VDC and 50VDC with a 200mV resolution and is powered from the signal being measured.
It’s important to note that only valid readings are displayed. The module indicates LO at voltages below 4V and HI at voltages above 40V. A rubber seal is included, providing splash-proof protection for the unit when fitted to the meter during the installation.

Features and Benefits


2-wire operation
Single hole mounting
Reverse polarity protection
LCD digit height is 12.5mm (0.5in)
Operating temperature ranging between 0°C and 0°C

Certifications


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

관련된 링크들