제조사부품번호

Microchip Adjustable Series Voltage Reference 5 % 3-Pin TO-252, LR12K4-G

RS 제품 번호:: 649-531
제조사 부품 번호:: LR12K4-G
제조업체:: Microchip

Microchip Adjustable Series Voltage Reference 5 % 3-Pin TO-252, LR12K4-G

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tape of 2 units)*

₩7,614.00

재고있음

추가로 2026년 3월 02일 부터 1,970 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tape*
2 - 18	₩3,807.00	₩7,614.00
20 - 98	₩3,355.80	₩6,711.60
100 - 198	₩3,008.00	₩6,016.00
200 +	₩2,585.00	₩5,170.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 649-531
제조사 부품 번호:: LR12K4-G
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Product Type	Voltage Reference
	Reference Voltage	1.2V
	Package Type	TO-252
	Output Voltage	100 V
	Reference Type	Adjustable
	Initial Accuracy	5 %
	Mount Type	Surface
	Topology	Series
	Maximum Input Voltage	100V
	Output Current	100mA
	Minimum Operating Temperature	-40°C
	Pin Count	3
	Line Regulation	0.003 to 0.03 %/V
	Maximum Operating Temperature	85°C
	Load Regulation	1.4 to 3 %
	Standards/Approvals	No
	Series	LR12
	Automotive Standard	No
	Minimum Input Voltage	13.2V

	모두 선택
	브랜드 Microchip
	Product Type Voltage Reference
	Reference Voltage 1.2V
	Package Type TO-252
	Output Voltage 100 V
	Reference Type Adjustable
	Initial Accuracy 5 %
	Mount Type Surface
	Topology Series
	Maximum Input Voltage 100V
	Output Current 100mA
	Minimum Operating Temperature -40°C
	Pin Count 3
	Line Regulation 0.003 to 0.03 %/V
	Maximum Operating Temperature 85°C
	Load Regulation 1.4 to 3 %
	Standards/Approvals No
	Series LR12
	Automotive Standard No
	Minimum Input Voltage 13.2V

Datasheet - LR12K4-G

COO (Country of Origin):: CN

The Microchip High voltage low output current adjustable linear regulator with an operating input voltage range from 13.2V to 100V. The output voltage is adjustable from 1.20V to 88V, requiring at least a 12V difference between input and output. Voltage adjustment is achieved using two external resistors R1 and R2. The LR12 maintains a nominal 1.20V between VOUT and ADJ pins, which is amplified by the resistor ratio. An internal bias current of typically 10 μA is applied to the ADJ pin.

Stable with 100nF output capacitor

Adjustable 1.20 to 88V output regulation

5% reference voltage tolerance

Output current limiting, 50mA min.

10μA typical ADJ current

Over temperature protection

Available in 3 different packages

Microchip Adjustable Series Voltage Reference 5 % 3-Pin TO-252, LR12K4-G

관련된 링크들