SMC Pressure Switch 0.1 MPa to 0.7 MPa

This pressure switch senses pneumatic pressure in Air systems and converts it to an electrical output for control and monitoring tasks. It is intended for industrial automation environments where compact, low-current signalling is required and is mounted via a bracket for stable installation.

• Switches up to 0.7 MPa to support high-pressure pneumatic circuits
• Operates between -5 to 60°C enabling varied thermal conditions
• Accepts 100V supply for integration with common control voltages
• Low current draw of 20 mA reduces load on control electronics
• Selectable PNP or NPN output for flexible wiring arrangements
• IP40 enclosure offering Basic protection in controlled environments

• Suitable for detection of supply pressure in pneumatic tooling
• Ideal for integration with PLC inputs in factory automation
• Used with Air preparation units for system pressure monitoring
• Can be used for sequencing valves in machine control panels
• Suitable for electrical and mechanical test rigs requiring pressure feedback

It is designed for bracket mounting to provide a rigid, repeatable fixing point for panel or frame attachment.

The sensor is specified for use with Air and should be operated only with compatible clean, dry pneumatic media.

Outputs can be configured as either PNP or NPN, allowing direct connection to sinking or sourcing inputs on controllers.

The unit must be used within an ambient temperature range of -5 to 60°C and in environments suited to an IP40 protection level.