SMC Pressure Switch 0.1 MPa to 0.7 MPa

This pressure switch provides a Compact means of monitoring and controlling pneumatic pressure in Air systems within industrial settings. Designed for bracket mounting, it delivers electrical switching outputs compatible with common control architectures and is intended for use outside hazardous zones.

• Supports both NPN and PNP outputs for flexible interfacing
• Operates up to 0.7 MPa enabling high-precision pressure control
• Handles supply voltages up to 100V for broad system compatibility
• Rated current 20 mA for low-power signalling applications
• Serviceable across -5 to 60 °C for varied ambient conditions
• IP40 enclosure permits indoor installation in controlled environments

• Suitable for monitoring compressed-Air lines in automation cells
• Ideal for integration with electronic control panels in manufacturing
• Used for pneumatic actuator feedback in mechanical systems
• Can be used for pressure detection on laboratory Air supplies
• Suitable for signal generation in pneumatic sequencing equipment

It is specified for use with Air only, making it suitable where clean compressed Air is the sensing medium.

No, it lacks hazardous-area certification and should only be installed in non-hazardous locations.

The unit is intended to be fixed using a bracket mount to provide stable positioning adjacent to the pressure source.

The device is rated for operation from -5 to 60 °C, permitting use in most indoor industrial environments that remain within that ambient range.

It carries an IP40 rating, offering protection against solid objects greater than 1mm but not against water ingress.