제조사부품번호

SICK Pressure Switch -1 bar to 1 bar

RS 제품 번호:: 100-0677
제조사 부품 번호:: PAC50-BGC / 1062960
제조업체:: SICK

Subtotal (1 unit)*

₩339,319.50

재고있음

7 개 단위 배송 준비 완료
추가로 2026년 6월 17일 부터 4 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩339,319.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 100-0677
제조사 부품 번호:: PAC50-BGC / 1062960
제조업체:: SICK

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SICK
	Product Type	Pressure Switch
	Minimum Operating Pressure	-1bar
	Switch Output	NPN, Push Pull, PNP
	Suitable Medias	Air
	Pressure Type	Positive Pressure, Negative Pressure
	Mount Type	DIN Rail
	Voltage	30V dc
	Analogue Output	4 to 20 mA, 0 to 10 V dc
	Series	PAC50
	Maximum Operating Pressure	1 bar
	Port Gender	Female
	Connection Thread Standard	Metric, G
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	IEC/EN
	Width	35mm
	Height	63mm
	Depth	35mm
	IP Rating	IP65, IP67
	Hazardous Area Certification	NO
	LED Indicator	Yes

	모두 선택
	브랜드 SICK
	Product Type Pressure Switch
	Minimum Operating Pressure -1bar
	Switch Output NPN, Push Pull, PNP
	Suitable Medias Air
	Pressure Type Positive Pressure, Negative Pressure
	Mount Type DIN Rail
	Voltage 30V dc
	Analogue Output 4 to 20 mA, 0 to 10 V dc
	Series PAC50
	Maximum Operating Pressure 1 bar
	Port Gender Female
	Connection Thread Standard Metric, G
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 60°C
	Standards/Approvals IEC/EN
	Width 35mm
	Height 63mm
	Depth 35mm
	IP Rating IP65, IP67
	Hazardous Area Certification NO
	LED Indicator Yes

COO (Country of Origin):: TH

PAC50 Pressure Switches

The SICK PAC50 pressure switch provides an easy to read overview of important system information using a clear bi colour display. Simple to programme making commissioning fast and easy, the PAC50 provides up to 2 switch outputs and an extra analogue output in a rugged casing.

Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.

Features and Benefits

Integrated pressure switch, transmitter and display

Clear simultaneous display of applied pressure and set points

Colour change when set points are reached

3 large push buttons

DIN rail or panel mounting (via accessory)

Standard M12 electrical connection

PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)

Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.

Analogue outputs configurable 4-20mA / 0-10V

Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar

Set-up and Installation

Installation and set-up of the PAC50 is fast and easy with no tools required for programming. Mounting is done using the integrated DIN Rail Mounting on the back or with the panel and wall mounting kit available separately (1000682).

Set-up and commissioning are done by using the three buttons on the front panel. Use the arrow keys to navigate the menu and the middle key to select the required parameter. Then simply use the arrow keys and adjust to the required set point before saving by using the middle key. Your PAC50 is now ready for operation.

Applications

The PAC50 is suitable for use with both positive pressure and vacuum systems in a range of applications including pneumatic control systems, vacuum grippers and cylinder pressure regulation.

SICK Pressure Switch -1 bar to 1 bar

PAC50 Pressure Switches

Features and Benefits

Set-up and Installation

Applications

관련된 링크들