Microchip USB5734-I/MR, Controller IC, 1-Channel 5 Gbps, 3.6 V, USB 3.0, 1.2 V, 64-Pin SQFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩10,659.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 1월 19일 부터 119 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 64₩10,659.60
65 - 129₩10,434.00
130 +₩10,246.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
893-8316
제조사 부품 번호:
USB5734-I/MR
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Controller IC

Maximum Data Rate

5Gbps

Number of Transceivers

1

USB Specification

USB 2.0

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Minimum Supply Voltage

1.2V

Maximum Supply Voltage

3.6V

Mount Type

Surface

Package Type

SQFN

Pin Count

64

Supported Protocols

USB 3.0

Minimum Operating Temperature

-40°C

Dual Supply Voltage

3.3V

Maximum Operating Temperature

85°C

Standards/Approvals

No

Length

9mm

Height

1mm

Series

USB5734

Width

9 mm

Automotive Standard

No

USB5734 USB 3.0 Hub Controllers


From Microchip the USB5734 is a 3.0 compliant (also known as USB 3.1 Gen 1) and supports all the defined USB speeds up to the 5 Gbps SuperSpeed (SS) data rate on all enabled downstream ports. The device integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.

The USB5734 integrates functions that would typically be associated with a separate MCU or processor; as such Microchip classifies this device as a ’Smart Hub’. For example the device can communicate to peripherals via I2C, SPI, GPIOs or UART in addition to USB. Also a downstream device can take control of the host system by swapping roles to become the host port, with the Smart Hub switching between two different hosts if required.

Features


Four downstream USB 3.0 (USB 3.1 Gen1)/2.0 ports

Integrated Hub Feature Controller (HFC) enabling I/O bridging and FlexConnect

I/O Bridging: Host communication to external peripherals - USB to I2C/UART/SPI/GPIO

FlexConnect: Host port swapping and switching to downstream devices

Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)

Simultaneous data transfer for 2500 mA of high speed charging

Port Configuration Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable

Application Straps: Predefined configuration of GPIOs for specific Use Cases including Mixed Mode, FlexConnect Mode, Port Speed mode, Port BC Mode and UART Mode.

ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM

Manufacturing line programming tool and field update capabilities

USB Link Power Management (LPM) support

IETF RFC 4122 compliant 128-bit UUID

Compatible with Microsoft® Windows® 8/8.1 and other major OS’s

USB (Universal Serial Bus) - Microchip


관련된 링크들