Microchip USB5734-I/MR, USB Controller, 5Gbit/s, USB 3.0, 1.2 V, 3.3 V, 64-Pin SQFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tray of 260 units)*

₩2,732,392.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 3월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tray*
260 - 1040₩10,509.20₩2,732,489.76
1300 +₩10,298.64₩2,677,890.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
165-4285
제조사 부품 번호:
USB5734-I/MR
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Number of Transceivers

1

Data Rate

5Gbit/s

IC Type

Controller IC

Protocols Supported

USB 3.0

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

1.2 V, 3.3 V

Mounting Type

Surface Mount

Package Type

SQFN

Pin Count

64

Dimensions

9 x 9 x 1mm

Height

1mm

Length

9mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

9mm

COO (Country of Origin):
TH

USB5734 USB 3.0 Hub Controllers


From Microchip the USB5734 is a 3.0 compliant (also known as USB 3.1 Gen 1) and supports all the defined USB speeds up to the 5 Gbps SuperSpeed (SS) data rate on all enabled downstream ports. The device integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.

The USB5734 integrates functions that would typically be associated with a separate MCU or processor; as such Microchip classifies this device as a ’Smart Hub’. For example the device can communicate to peripherals via I2C, SPI, GPIOs or UART in addition to USB. Also a downstream device can take control of the host system by swapping roles to become the host port, with the Smart Hub switching between two different hosts if required.

Features


Four downstream USB 3.0 (USB 3.1 Gen1)/2.0 ports
Integrated Hub Feature Controller (HFC) enabling I/O bridging and FlexConnect
I/O Bridging: Host communication to external peripherals - USB to I2C/UART/SPI/GPIO
FlexConnect: Host port swapping and switching to downstream devices
Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)
Simultaneous data transfer for 2500 mA of high speed charging
Port Configuration Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
Application Straps: Predefined configuration of GPIOs for specific Use Cases including Mixed Mode, FlexConnect Mode, Port Speed mode, Port BC Mode and UART Mode.
ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM
Manufacturing line programming tool and field update capabilities
USB Link Power Management (LPM) support
IETF RFC 4122 compliant 128-bit UUID
Compatible with Microsoft® Windows® 8/8.1 and other major OS’s

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



USB (Universal Serial Bus) - Microchip

관련된 링크들