제조사부품번호

Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN

RS 제품 번호:: 177-9859
제조사 부품 번호:: USB3300-EZK-TR
제조업체:: Microchip

Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 10 units)*

₩25,398.80

재고있음

3,470 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
10 - 1240	₩2,539.88	₩25,398.80
1250 +	₩2,489.12	₩24,891.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 177-9859
제조사 부품 번호:: USB3300-EZK-TR
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Number of Transceivers	3
	Product Type	USB Transceiver
	Sub Type	Transceiver
	USB Specification	USB 2.0
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	3.3V
	Minimum Supply Voltage	3.3V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	32
	Supported Protocols	UTMI + ULPI, OTG, USB 2.0
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	No
	Length	5.1mm
	Height	0.95mm
	Width	5.1 mm
	Series	USB3300
	Automotive Standard	No

	모두 선택
	브랜드 Microchip
	Number of Transceivers 3
	Product Type USB Transceiver
	Sub Type Transceiver
	USB Specification USB 2.0
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 3.3V
	Minimum Supply Voltage 3.3V
	Mount Type Surface
	Package Type QFN
	Pin Count 32
	Supported Protocols UTMI + ULPI, OTG, USB 2.0
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Standards/Approvals No
	Length 5.1mm
	Height 0.95mm
	Width 5.1 mm
	Series USB3300
	Automotive Standard No

Datasheet

COO (Country of Origin):: TW

The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.

USB-IF Hi-Speed

Latch-Up performance exceeds 150 mA

ESD protection levels of ±8kV HBM without external protection devices

Includes full support for the optional On-The-Go (OTG) protocol

Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)

Allows host to turn VBUS off to conserve battery power in OTG applications

Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN

관련된 링크들