Microchip MCP2221A-I/P, USB Bridge IC, 12Mbps, 3 to 5.5 V, 14-Pin PDIP

Subtotal (1 pack of 5 units)*

₩23,406.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 26일 부터 55 개 단위 배송
  • 추가로 2026년 1월 02일 부터 185 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
5 +₩4,681.20₩23,406.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
171-7828
제조사 부품 번호:
MCP2221A-I/P
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Number of Transceivers

1

Data Rate

12Mbps

IC Type

Controller IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3 to 5.5 V

Mounting Type

Through Hole

Package Type

PDIP

Pin Count

14

Dimensions

0.77 x 0.28 x 0.19in

Height

4.83mm

Length

19.56mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

7.11mm

Automotive Standard

AEC-Q100

Microchip Technology USB Controller


The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller. Its voltage rating ranges between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces.

Features and Benefits


• Bus-powered or self-powered
• Data rate is 12Mbit/s
• Fully configurable VID and PID assignments and string descriptors
• General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector
• Highly configurable
• Operating temperature ranges between -40°C and 85°C
• Supports Electrostatic Discharge (ESD) protection
• USB 2.0 compliant

Applications


• Automobile engine control systems
• Electronic devices
• Embedded systems
• Remote control systems

Certifications


• AEC-Q100

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들