Littelfuse 1-Element Bi-Directional TVS Diode, 1500 W, 2-Pin DO-201

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 1200 units)*

₩821,184.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 7월 06일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
1200 - 1200₩684.32₩821,409.60
2400 +₩671.16₩804,940.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
171-6728
제조사 부품 번호:
1.5KE200CA
제조업체:
Littelfuse
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Littelfuse

Diode Configuration

Single

Product Type

TVS Diode

Direction Type

Bi-Directional

Minimum Breakdown Voltage Vbr

190V

Mount Type

Through Hole

Package Type

DO-201

Maximum Reverse Stand-off Voltage Vwm

171V

Pin Count

2

Peak Pulse Power Dissipation Pppm

1500W

Minimum Operating Temperature

-55°C

Test Current It

1mA

Maximum Peak Pulse Current Ippm

5.5A

ESD Protection

Yes

Clamping Voltage VC

274V

Number of Elements per Chip

1

Maximum Operating Temperature

175°C

Diameter

5.3 mm

Standards/Approvals

No

Length

9.5mm

Series

1.5KE

Maximum Reverse Leakage Current

1μA

Automotive Standard

No

COO (Country of Origin):
CN
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

1500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%

Glass passivated chip junction in DO-201 Package

Fast response time: typically less than 1.0ps from 0 Volts to BV min

Excellent clamping capability

Typical failure mode is short from over-specified voltage or current

Low incremental surge resistance

Typical IR less than 1μA when VBR min>12V

High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension

VBR @ TJ = VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)

Plastic package is flammability rated V-0 per Underwriters Laboratories

Matte tin lead–free plated

Halogen free

Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)

관련된 링크들