수량

수량 선택 또는 입력

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Littelfuse
	Rated Average On-State Current Irms	15A
	Product Type	TRIAC
	Mount Type	Through Hole
	Package Type	TO-220AB
	Maximum Gate Trigger Current Igt	50mA
	Repetitive Peak Reverse Voltage VDRM	600V
	Surge Current Rating	200A
	Pin Count	3
	Maximum Gate Trigger Voltage Vgt	2V
	Configuration	Single
	Maximum Holding Current Ih	70mA
	Peak Gate Power Dissipation	0.5W
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Standards/Approvals	No
	Height	15.75mm
	Width	4.78 mm
	Length	10.67mm
	Automotive Standard	No
	Repetitive Peak Off-State Current	5μA
	Peak On-State Voltage	1.6V

	모두 선택
	브랜드 Littelfuse
	Rated Average On-State Current Irms 15A
	Product Type TRIAC
	Mount Type Through Hole
	Package Type TO-220AB
	Maximum Gate Trigger Current Igt 50mA
	Repetitive Peak Reverse Voltage VDRM 600V
	Surge Current Rating 200A
	Pin Count 3
	Maximum Gate Trigger Voltage Vgt 2V
	Configuration Single
	Maximum Holding Current Ih 70mA
	Peak Gate Power Dissipation 0.5W
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Standards/Approvals No
	Height 15.75mm
	Width 4.78 mm
	Length 10.67mm
	Automotive Standard No
	Repetitive Peak Off-State Current 5μA
	Peak On-State Voltage 1.6V

COO (Country of Origin):: CN

15 Amp and 16 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability.

Features & Benefits:

Glass - passivated junctions

Voltage capability up to 1000 V

Surge capability up to 200 A

Solid-state switching eliminates arcing or contact bounce that create voltage transients

No contacts to wear out from reaction of switching events

Restricted (or limited) RFI generation, depending on activation point sine wave

Requires only a small gate activation pulse in each half-cycle

Applications:

Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls.

Typical applications are AC solid-state switches, light dimmers, power tools, lawn care equipment, home/brown goods and white goods appliances.

Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance.

Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.

수량	한팩당	한팩당*
2 - 124	₩4,775.20	₩9,550.40
126 - 248	₩4,662.40	₩9,324.80
250 +	₩4,577.80	₩9,155.60

Littelfuse Through Hole, 3-Pin, TRIAC 600 V, Gate Trigger 2 V

관련된 링크들