nVent RAYCHEM Trace Heating Junction Box 122mm x 120mm x 90mm, -50 → +40 °C
- RS 제품 번호:
- 380-9765
- 제조사 부품 번호:
- JBS-100
- 제조업체:
- nVent RAYCHEM
Subtotal (1 kit)*
₩268,182.00
일시적 품절
- 2026년 3월 27일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Kit(s) | Per Kit |
|---|---|
| 1 + | ₩268,182.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 380-9765
- 제조사 부품 번호:
- JBS-100
- 제조업체:
- nVent RAYCHEM
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | nVent RAYCHEM | |
| Dimensions | 120 x 122 x 90mm | |
| Minimum Operating Temperature | -50°C | |
| Maximum Operating Temperature | +40°C | |
| Height | 122mm | |
| Length | 120mm | |
| Width | 90mm | |
| Hazardous Area Certification | ATEX | |
| 모두 선택 | ||
|---|---|---|
브랜드 nVent RAYCHEM | ||
Dimensions 120 x 122 x 90mm | ||
Minimum Operating Temperature -50°C | ||
Maximum Operating Temperature +40°C | ||
Height 122mm | ||
Length 120mm | ||
Width 90mm | ||
Hazardous Area Certification ATEX | ||
제외
Raychem® Single-Entry Power Connection with Junction Box
Suitable for BTV/XTV heating cables in hazardous/non-hazardous areas
The kit integrates the functions of connection kit, insulation entry kit and support bracket
Heating cable is fully protected
Fast and easy to install
Cold applied, no need for heat guns
Cage clamp terminal for fast installation
Internal earth continuity plate
Kit contains all necessary materials for complete connection (excluding pipe strap)
2 Types of kit are available: JBM-100-EP multiple entry power connection to connect power to 3 heating cables, and the JBS-100-EP single entry power connection designed to connect a single heating cable
An E-150-E end seal kit is required to terminate each cable (see stock no. 380-9951)
The kit integrates the functions of connection kit, insulation entry kit and support bracket
Heating cable is fully protected
Fast and easy to install
Cold applied, no need for heat guns
Cage clamp terminal for fast installation
Internal earth continuity plate
Kit contains all necessary materials for complete connection (excluding pipe strap)
2 Types of kit are available: JBM-100-EP multiple entry power connection to connect power to 3 heating cables, and the JBS-100-EP single entry power connection designed to connect a single heating cable
An E-150-E end seal kit is required to terminate each cable (see stock no. 380-9951)
Certificate No.
PTB 98 ATEX 1021 U
Group and Category
II 2 G EEx e II
Approvals
II 2G EEx e II
Standards
EN 50014; EN 50019
Supplied with
7777
Power Connection
관련된 링크들
- nVent RAYCHEM Trace Heating Junction Box Kit
- nVent RAYCHEM Trace Heating Junction Box 120mm x 220mm x 90mm, -50 → +40 °C
- nVent RAYCHEM Trace Heating Junction Box 75mm x 130mm x 130mm, -35 → +115 °C
- nVent RAYCHEM Trace Heating Termination Kit
- RS PRO Trace Heating Junction Box Kit 66mm x 110mm x 110mm
- nVent RAYCHEM Trace Heating Connection Kit 47mm x 240mm x 64mm
- nVent RAYCHEM Frost Protection Trace Heating Kit, 15W/m, 230V ac, -60 → +65 °C
- nVent RAYCHEM Trace Heating Thermostat, -5 → +15 °C
