Wera Adjustable Hexagon Torque Screwdriver, 0.1 To 0.34 Nm, 4 mm Drive ESD Safe, ±6 % Accuracy
- RS 제품 번호:
- 123-1845
- 제조사 부품 번호:
- 05074826001
- 제조업체:
- Wera
Subtotal (1 unit)*
₩180,122.80
재고있음
- 추가로 2026년 2월 23일 부터 15 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩180,122.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 123-1845
- 제조사 부품 번호:
- 05074826001
- 제조업체:
- Wera
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Wera | |
| Product Type | Torque Screwdriver | |
| Torque Range | 0.1 To 0.34 Nm | |
| Sub Type | Adjustable | |
| Tip Type | Hexagon | |
| Drive Size | 4 mm | |
| ESD Safe | Yes | |
| Overall Length | 138mm | |
| Accuracy | ±6 % | |
| Grip Style | Multi-Component Kraftform Plus Handle | |
| Standards/Approvals | DIN ISO 1173-C 6.3 and E 6.3 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Wera | ||
Product Type Torque Screwdriver | ||
Torque Range 0.1 To 0.34 Nm | ||
Sub Type Adjustable | ||
Tip Type Hexagon | ||
Drive Size 4 mm | ||
ESD Safe Yes | ||
Overall Length 138mm | ||
Accuracy ±6 % | ||
Grip Style Multi-Component Kraftform Plus Handle | ||
Standards/Approvals DIN ISO 1173-C 6.3 and E 6.3 | ||
제외
- COO (Country of Origin):
- CZ
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck
Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).
Please note: 1 Ncm = 0.01 Nm.
Factory pre-set, adjustable Kraftform ESD torque screwdriver
ESD-safe tool thanks to surface resistance of ≤ 10^9 Ohm
Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive
Distinct audible and perceivable excess load signal when the pre-set torque value is reached
Kraftform handle for fast and ergonomic screwdriving
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 Nm
관련된 링크들
- Wera Adjustable Torque Screwdriver, 0.3 To 1 Nm, 4 mm Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.30 to 1 Nm, 142 mm Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.05 To 0.11 Nm, 4 mm Drive ESD Safe, ±10 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.1 To 0.34 Nm, 4 mm Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.02 To 0.06 Nm, 4 mm Drive ESD Safe, ±10 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.3 To 1 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 1.2 To 3 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver, 0.1 To 0.34 Nm, 1/4 in Drive ESD Safe, ±6 % Accuracy