제조사부품번호

Nuvotem Talema 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 50 VA, RoHS

RS 제품 번호:: 257-5039
제조사 부품 번호:: 91236-P2S2
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 15 V ac Toroidal Transformer 2 Output 50 VA, RoHS

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩58,449.20

재고있음

75 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 24	₩58,449.20
25 +	₩56,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 257-5039
제조사 부품 번호:: 91236-P2S2
제조업체:: Nuvotem Talema

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 15 V ac
	Number of Outputs	2
	Secondary Current	1.667 A
	Power	50VA
	Weight	650g
	Diameter	80 mm
	Minimum Operating Frequency	50Hz
	Toroid Centre	Open
	Winding Type	Single Primary
	Maximum Operating Frequency	60Hz
	Maximum Operating Temperature	40°C
	Height	33mm
	Termination Type	Lead
	Standards/Approvals	RoHS

	모두 선택
	브랜드 Nuvotem Talema
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 15 V ac
	Number of Outputs 2
	Secondary Current 1.667 A
	Power 50VA
	Weight 650g
	Diameter 80 mm
	Minimum Operating Frequency 50Hz
	Toroid Centre Open
	Winding Type Single Primary
	Maximum Operating Frequency 60Hz
	Maximum Operating Temperature 40°C
	Height 33mm
	Termination Type Lead
	Standards/Approvals RoHS

Open-Style-2x115V-Primary-0050VA_Datasheet

Open Style with Leads, 115/230Vac Primary 15VA to 1000VA

High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field

Very low induced noise (hum)

Very low iron loss

Double insulated primary leads

Supplied with mounting kit

100% electrical and flash tested

Approvals

UL506, EN61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards

EN61558; EN60950; EN60065; BS415

Supplied with

Full mounting kit