제조사부품번호

Nuvotem Talema 230 V ac 2 x 40 V ac Toroidal Transformer 2 Output 625 VA, VDE, UL

RS 제품 번호:: 223-8320
제조사 부품 번호:: 0625P1-2-040
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 40 V ac Toroidal Transformer 2 Output 625 VA, VDE, UL

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩315,471.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 - 24	₩315,471.00
25 +	₩307,749.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 223-8320
제조사 부품 번호:: 0625P1-2-040
제조업체:: Nuvotem Talema

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 40 V ac
	Number of Outputs	2
	Secondary Current	7.81A
	Weight	4.3kg
	Power	625VA
	Diameter	136mm
	Minimum Operating Temperature	0°C
	Maximum Operating Frequency	450Hz
	Winding Type	Dual Secondary
	Toroid Centre	Potted
	Maximum Operating Temperature	120°C
	Height	68mm
	Termination Type	Copper Conductor Termination Wire
	Standards/Approvals	VDE, UL

	모두 선택
	브랜드 Nuvotem Talema
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 40 V ac
	Number of Outputs 2
	Secondary Current 7.81A
	Weight 4.3kg
	Power 625VA
	Diameter 136mm
	Minimum Operating Temperature 0°C
	Maximum Operating Frequency 450Hz
	Winding Type Dual Secondary
	Toroid Centre Potted
	Maximum Operating Temperature 120°C
	Height 68mm
	Termination Type Copper Conductor Termination Wire
	Standards/Approvals VDE, UL

Datasheet

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Approvals

UL 506; EN 61558

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Standards

UL 506; EN 61558

Supplied with

Full mounting kit