제조사부품번호

Nuvotem Talema 230 V ac 2 x 25 V ac Toroidal Transformer 2 Output 225 VA, UL 506, EN 60065, UL 5085

RS 제품 번호:: 223-8178
제조사 부품 번호:: 0225P1-2-025
제조업체:: Nuvotem Talema

Nuvotem Talema 230 V ac 2 x 25 V ac Toroidal Transformer 2 Output 225 VA, UL 506, EN 60065, UL 5085

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩144,666.00

재고있음

43 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 24	₩144,666.00
25 +	₩141,056.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 223-8178
제조사 부품 번호:: 0225P1-2-025
제조업체:: Nuvotem Talema

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nuvotem Talema
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 25 V ac
	Number of Outputs	2
	Secondary Current	4.5 A
	Weight	1.9kg
	Power	225VA
	Diameter	112 mm
	Maximum Operating Frequency	450Hz
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	120°C
	Height	47mm
	Termination Type	Copper Conductor Termination Wire
	Standards/Approvals	UL 506, EN 60065, UL 5085

	모두 선택
	브랜드 Nuvotem Talema
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 25 V ac
	Number of Outputs 2
	Secondary Current 4.5 A
	Weight 1.9kg
	Power 225VA
	Diameter 112 mm
	Maximum Operating Frequency 450Hz
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 120°C
	Height 47mm
	Termination Type Copper Conductor Termination Wire
	Standards/Approvals UL 506, EN 60065, UL 5085

Datasheet

Open Style with Leads, 15VA to 1000VA

High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.

Small size and low weight compared with traditional stacked lamination types

Extremely low level of radiated magnetic field and very low induced noise (hum)

Very low iron losses

Double insulated primary leads

100% electrical and flash tested

High-quality manufacturing and testing in accordance to EN61558, EN60950, EN60065, VDE 0551, VDE 0550 and BS415

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

Approvals

UL 506; EN 61558

Standards