SKF PHG 550-5M-15 Timing Belt 110 Teeth, 550 mm Length, 15 mm Width
- RS 제품 번호:
- 586-535
- 제조사 부품 번호:
- PHG 550-5M-15
- 제조업체:
- SKF
Subtotal (1 pack of 5 units)*
₩80,067.00
일시적 품절
- 2026년 5월 26일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩80,067.00 | ₩16,013.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 586-535
- 제조사 부품 번호:
- PHG 550-5M-15
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Timing Belt | |
| Belt Section | 5M | |
| Pitch | 5mm | |
| Number of Teeth | 110 | |
| Cord Material | Fibreglass | |
| Series | PHG | |
| Belt Width | 15mm | |
| Pitch Length | 5mm | |
| Belt Length | 550mm | |
| Standards/Approvals | RoHS | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Timing Belt | ||
Belt Section 5M | ||
Pitch 5mm | ||
Number of Teeth 110 | ||
Cord Material Fibreglass | ||
Series PHG | ||
Belt Width 15mm | ||
Pitch Length 5mm | ||
Belt Length 550mm | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- CN
SKF PHG Series Timing Belt, 550mm Belt Length, 15mm Belt Width - PHG 550-5M-15
This timing belt is a toothed drive element designed for synchronised power transmission in industrial and automation systems. It provides positive engagement between pulleys to maintain precise speed ratios and phase alignment for motion control and timing tasks across electronic and mechanical equipment.
Features and Benefits:
• 5mm pitch enhances accurate synchronous engagement and positioning
• 110 teeth deliver consistent tooth-to-tooth load distribution
• Fibreglass cord increases tensile stiffness for reduced elongation
• 15mm width supports higher torque capacity in Compact drives
• RoHS compliance minimises restricted substance content for installations
• 110 teeth deliver consistent tooth-to-tooth load distribution
• Fibreglass cord increases tensile stiffness for reduced elongation
• 15mm width supports higher torque capacity in Compact drives
• RoHS compliance minimises restricted substance content for installations
Applications
• Suitable for conveyor indexing in automated assembly lines
• Ideal for stepper motor-driven positioning systems
• Used with timing pulleys in packaging machinery
• Can be used for drive trains in laboratory automation
• Used for synchronised shafts in small-scale production equipment
• Ideal for stepper motor-driven positioning systems
• Used with timing pulleys in packaging machinery
• Can be used for drive trains in laboratory automation
• Used for synchronised shafts in small-scale production equipment
How does cord material affect long-term dimensional stability?
The fibreglass cord provides low stretch under load, preserving belt length and reducing the need for frequent re-tensioning in precision applications.
What pitch and tooth count mean for pulley selection?
A 5mm pitch with 110 teeth requires compatible 5M pulleys sized for a 550mm pitch length to ensure correct meshing and phase alignment.
How does belt width impact load capacity?
A 15mm cross-section increases the contact area with pulley flanks, allowing the belt to transmit greater torque without increasing pulley diameter.
What environmental or regulatory consideration is addressed by the product?
The belt meets RoHS restrictions on certain hazardous substances, supporting use in installations where reduced restricted material content is required.
관련된 링크들
- SKF PHG 550-5M-S450 Timing Belt 110 Teeth, 550 mm Length, 450 mm Width
- Contitech 550 5M 15 Timing Belt 110 Teeth, 550 mm Length, 15 mm Width
- OPTIBELT 550 5MHP 15 Timing Belt 110 Teeth, 550 mm Length, 15 mm Width
- OPTIBELT 550 5M 15 Timing Belt 110 Teeth, 550 mm Length, 15 mm Width
- RS PRO Timing Belt 110 Teeth, 550 mm Length, 15 mm Width
- OPTIBELT 16 T5 / 550 Timing Belt 110 Teeth, 550 mm Length, 16 mm Width
- OPTIBELT 12 T5 / 550 Timing Belt 110 Teeth, 550 mm Length, 12 mm Width
- OPTIBELT 550 5MHP 9 Timing Belt 110 Teeth, 550 mm Length, 9 mm Width