SKF PHG 1040-8M-30 Timing Belt 130 Teeth, 1.04 m Length, 30 mm Width
- RS 제품 번호:
- 464-545
- 제조사 부품 번호:
- PHG 1040-8M-30
- 제조업체:
- SKF
Subtotal (1 unit)*
₩54,820.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩54,820.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 464-545
- 제조사 부품 번호:
- PHG 1040-8M-30
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Timing Belt | |
| Belt Section | 8M | |
| Pitch | 8mm | |
| Number of Teeth | 130 | |
| Cord Material | Fibreglass | |
| Series | PHG | |
| Pitch Length | 8mm | |
| Belt Length | 1.04m | |
| Belt Width | 30mm | |
| Standards/Approvals | RoHS | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Timing Belt | ||
Belt Section 8M | ||
Pitch 8mm | ||
Number of Teeth 130 | ||
Cord Material Fibreglass | ||
Series PHG | ||
Pitch Length 8mm | ||
Belt Length 1.04m | ||
Belt Width 30mm | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- CN
SKF PHG Series Timing Belt, 1040mm Belt Length, 30mm Belt Width - PHG 1040-8M-30
This timing belt transmits rotary motion between pulleys in precision power-transmission systems and is designed for use where synchronised drive is required. It features a toothed profile compatible with matching pulley sprockets and is intended for industrial setups that demand consistent positional accuracy and repeatable timing.
Features and Benefits:
• 8mm pitch provides consistent engagement and reduced backlash
• Fibreglass cord offers enhanced tensile strength and low elongation
• 130 teeth deliver fine incremental motion control
• RoHS compliance limits restricted substances in material
• 30mm width increases contact area for load distribution
• Fibreglass cord offers enhanced tensile strength and low elongation
• 130 teeth deliver fine incremental motion control
• RoHS compliance limits restricted substances in material
• 30mm width increases contact area for load distribution
Applications
• Used for conveyor indexing where repeatable positioning is required
• Suitable for automated assembly equipment requiring synchronised motion
• Ideal for stepper-driven systems demanding accurate tooth engagement
• Can be used in packaging machines needing stable transmission
• Used with timing pulleys in precision printing mechanisms
• Suitable for automated assembly equipment requiring synchronised motion
• Ideal for stepper-driven systems demanding accurate tooth engagement
• Can be used in packaging machines needing stable transmission
• Used with timing pulleys in precision printing mechanisms
What materials contribute to the belt's tensile stability?
Tensile stability is provided by the fibreglass cord reinforcement embedded within the belt body.
How does tooth count affect motion resolution?
A higher tooth count results in smaller angular increments per tooth, enabling finer positional control.
Which attribute reduces environmental contaminants in the belt?
Conformity with RoHS limits specific hazardous substances used in the belt's composition.
How does pitch influence pulley selection?
The 8mm pitch determines the compatible pulley tooth spacing and must match pulley geometry for proper meshing.
관련된 링크들
- SKF PHG 1040-8M-20 Timing Belt 130 Teeth, 1040 mm Length, 20 mm Width
- SKF PHG 1040-8M-50 Timing Belt 130 Teeth, 1040 mm Length, 50 mm Width
- SKF PHG 1040-8M-S450 Timing Belt 130 Teeth, 1040 mm Length, 450 mm Width
- OPTIBELT 1040 8M 30 Timing Belt 130 Teeth, 1040 mm Length, 30 mm Width
- OPTIBELT 1040 8MHP 30 Timing Belt 130 Teeth, 1040 mm Length, 30 mm Width
- OPTIBELT 1040 8M 30 HIPO Timing Belt 130 Teeth, 1040 mm Length, 30 mm Width
- OPTIBELT 1040 8M 30 HILO Timing Belt 130 Teeth, 1040 mm Length, 30 mm Width
- Contitech 1040 8M 30 Timing Belt 130 Teeth, 1.04 m Length, 30 mm Width