Broyce Control LMAT Series DIN Rail Timer Relay, 1-Contact, 12 to 48 V dc 12V ac, 48 V ac, 1 to 60 s, 1-Function, SPDT
- RS 제품 번호:
- 188-3547
- 제조사 부품 번호:
- LMAT 12-48V AC/DC
- 제조업체:
- Broyce Control
Subtotal (1 unit)*
₩171,780.00
재고있음
- 추가로 2026년 7월 28일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩171,780.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 188-3547
- 제조사 부품 번호:
- LMAT 12-48V AC/DC
- 제조업체:
- Broyce Control
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broyce Control | |
| Product Type | Timer Relay | |
| Function | Alarm | |
| Mount Type | DIN Rail | |
| Time Range | 1 to 60 s | |
| Number of Contacts | 1 | |
| Switching Voltage | 250V | |
| Number of Timer Functions | 1 | |
| Contact Configuration | SPDT | |
| IP Rating | IP20 | |
| Supply DC Voltage | 12 to 48 V dc | |
| Supply AC Voltage | 12, 48V ac | |
| Minimum Operating Temperature | -20°C | |
| Contact Current | 8A | |
| Mode | Star-Delta | |
| Maximum Operating Temperature | 60°C | |
| Terminal Type | Screw | |
| Length | 17.5mm | |
| Height | 89mm | |
| Standards/Approvals | CE, C-Tick, IEC 61812, RoHS | |
| Width | 66.5mm | |
| Series | LMAT | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broyce Control | ||
Product Type Timer Relay | ||
Function Alarm | ||
Mount Type DIN Rail | ||
Time Range 1 to 60 s | ||
Number of Contacts 1 | ||
Switching Voltage 250V | ||
Number of Timer Functions 1 | ||
Contact Configuration SPDT | ||
IP Rating IP20 | ||
Supply DC Voltage 12 to 48 V dc | ||
Supply AC Voltage 12, 48V ac | ||
Minimum Operating Temperature -20°C | ||
Contact Current 8A | ||
Mode Star-Delta | ||
Maximum Operating Temperature 60°C | ||
Terminal Type Screw | ||
Length 17.5mm | ||
Height 89mm | ||
Standards/Approvals CE, C-Tick, IEC 61812, RoHS | ||
Width 66.5mm | ||
Series LMAT | ||
- COO (Country of Origin):
- GB
The timer is offered with two separate relays. When power is applied, the first relay (Attempts) will energize for the set “on” time delay period, then de-energize for the set “off” time delay period. This is classed as the “first attempt”. The same relay will continue to cycle on and off for the “number of attempts” set on the adjustment. If all the attempts are allowed to run, at the end of the last “on” time delay period, the first relay will de-energize and the second relay (Alarm) will energize and remain in this state. Power must be removed and re-applied to restart the function over again.
Multi Attempt to Start
Designed to limit the number of attempts an engine has to start before providing an alarm
Selectable number of attempts (2-8)
Multi-voltage (12 -48VAC/DC)
Single time range (1 - 60s)
2 x SPDT Relay outputs
17.5mm wide, DIN Rail mount
관련된 링크들
- Broyce Control LESW Series Panel Timer Relay, 2-Contact, 12 to 230 V ac/dc 230V, 1-Function, DPDT Switch Configuration
- Broyce Control LEIN Series Panel Timer Relay, 2-Contact, 12 to 230 V ac/dc 230V, 1-Function, DPDT Switch Configuration
- Broyce Control LEDO/2 Series DIN Rail Timer Relay, 2-Contact, 12 to 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h,
- Broyce Control LEDO Series DIN Rail Timer Relay, 1-Contact, 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h, 1-Function, SPDT
- Broyce Control LESW Series DIN Rail Timer Relay, 1-Contact, 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h, 1-Function, SPDT
- Broyce Control LEIN Series DIN Rail Timer Relay, 1-Contact, 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h, 1-Function, SPDT
- Broyce Control LEYD Series DIN Rail Timer Relay, 1-Contact, 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h, 1-Function, SPDT
- Broyce Control LRTM Series DIN Rail Timer Relay, 2-Contact, 230 V dc 12V ac, 230 V ac, 0.1 s to 100 h, 2-Function, DPDT