Dormer Threading Tap HSS-E 1-Piece 1.25mm Pitch Metric Standard Machine Tap M8 Thread
- RS 제품 번호:
- 299-9160
- 제조사 부품 번호:
- E207-M8
- 제조업체:
- Dormer
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩38,408.40
일시적 품절
- 2026년 1월 12일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩38,408.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 299-9160
- 제조사 부품 번호:
- E207-M8
- 제조업체:
- Dormer
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Dormer | |
| Set Type | Threading Tap | |
| Thread Size | M8 | |
| Type | Spiral Flute | |
| Pitch | 1.25mm | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Overall Length | 90 mm | |
| Number of Pieces | 1 | |
| Material | HSS-E | |
| Hand/Machine Tap | Machine Tap | |
| Shank Diameter | 8 mm | |
| Class of Fit | 6H | |
| 모두 선택 | ||
|---|---|---|
브랜드 Dormer | ||
Set Type Threading Tap | ||
Thread Size M8 | ||
Type Spiral Flute | ||
Pitch 1.25mm | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Overall Length 90 mm | ||
Number of Pieces 1 | ||
Material HSS-E | ||
Hand/Machine Tap Machine Tap | ||
Shank Diameter 8 mm | ||
Class of Fit 6H | ||
제외
- COO (Country of Origin):
- IT
E207 Metric Pitch Spiral Cobalt Machine Tap Bits
A range of metric pitch spiral cobalt machine tap bits. These tap bits meet stringent high-production machining demands due to significant resistance to wear and high temperatures.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
Standard: DIN 371
Rolled Flute Taps
Bright finish fluteless taps; for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
관련된 링크들
- Dormer Threading Tap HSS-E 1-Piece 0.8mm Pitch Metric Standard Machine Tap M5 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.4mm Pitch Metric Standard Machine Tap M2 Thread
- Dormer Threading Tap HSS-E 1-Piece 1.0mm Pitch Metric Standard Machine Tap M6 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.5mm Pitch Metric Standard Machine Tap M3 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-E 1-Piece 1.5mm Pitch Metric Standard Machine Tap M10 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.45mm Pitch Metric Standard Machine Tap M2.5 Thread
- Dormer Threading Tap HSS-E 1-Piece 1.25mm Pitch Metric Standard Machine Tap M8 Thread