Jumo Capillary Thermostat, 100 °C Max, Automatic Reset, NC, 10 A, Surface Mount

Subtotal (1 unit)*

₩901,800.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 04일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩901,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
279-075
제조사 부품 번호:
603026/0202-1-025-30-0-00-20-13-46-150-15-6/000
제조업체:
Jumo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Jumo

Minimum Operating Temperature

0°C

Product Type

Thermostat

Maximum Operating Temperature

100°C

Contact Configuration

NC

Thermostat Type

Capillary

Contact AC Voltage

230V ac

Contact Current

10A

Hazardous Area Certification

No

Standards/Approvals

DIN 3852/2, RoHS, DIN EN 14597, EAC, DGRL

Series

603026

Mount Type

Surface Mount

Reset Type

Automatic

COO (Country of Origin):
DE
The Jumo Mechanical Surface Mounting Double Thermostat is very robust and can also be used in rough conditions. The electrical connection is made by screw terminals connected directly to the installed microswitches, which can directly switch a maximum permissible switching capacity of AC 230 V / 10 A. The measuring systems used operate according to the fluid expansion principle and can be used up to a maximum permissible probe temperature of 125°C without any problems and the protection tube made of nickel plated brass has a diameter of 15 mm. The maximum permissible ambient temperature at the case (protection class IP54) is 80 °C. The thermostat can be used very flexibly and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, apparatus and mechanical engineering as well as in furnace construction, in district heating transfer stations and for temperature monitoring in laboratories and climatic chambers.

Approved according to DIN EN 14597 and an EAC approval

Device consists of two temperature monitors

Desired switch off temperature can be set independently on a scale with a screwdriver after removing the case cover

Temperature monitors have high switching point accuracy of +0/-1.5% in the upper third of the scale

Switching differential (hysteresis) is approx. 3 to 4% of the scale range

Monitors switch off after reaching the switch off point

Automatically return to the original state after falling below the switch off temperature by the switching differential

No additional auxiliary power required for temperature measurement

It is fastened by a thread G 1/2 Form A according to DIN 3852/2

관련된 링크들