STMicroelectronics MCP9701 Series, Digital Output Temperature Sensor, Surface Mount, I2C, 0.5 °C, 6-Pin UDFN
- RS 제품 번호:
- 194-7647
- 제조사 부품 번호:
- STTS22HTR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩17,745.00
일시적 품절
- 2027년 6월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 740 | ₩1,774.50 | ₩17,745.00 |
| 750 + | ₩1,737.45 | ₩17,374.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 194-7647
- 제조사 부품 번호:
- STTS22HTR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Product Type | Temperature Sensor | |
| Output Type | Digital | |
| Interface Type | I2C | |
| Sub Type | Temperature Sensor | |
| Accuracy | 0.5 °C | |
| Mount Type | Surface | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Minimum Supply Voltage | 1.5V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | UDFN | |
| Length | 2mm | |
| Series | MCP9701 | |
| Standards/Approvals | No | |
| Height | 0.55mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Product Type Temperature Sensor | ||
Output Type Digital | ||
Interface Type I2C | ||
Sub Type Temperature Sensor | ||
Accuracy 0.5 °C | ||
Mount Type Surface | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Minimum Supply Voltage 1.5V | ||
Maximum Supply Voltage 3.6V | ||
Package Type UDFN | ||
Length 2mm | ||
Series MCP9701 | ||
Standards/Approvals No | ||
Height 0.55mm | ||
Automotive Standard No | ||
The STTS22H is a band gap temperature sensor coupled with an A/D converter, signal processing logic and an I²C/SMBus 3.0 interface all in a single ASIC. This sensor is housed in a small 2 x 2 x 0.50 mm 6-lead UDFN package with exposed pad down for a better temperature match with the surrounding environment. The STTS22H is factory calibrated and requires no additional calibration efforts on the customer side.
Key features
Integrated high-accuracy temperature sensor
Factory calibrated
One-shot mode for power saving
Electrical specifications
Supply voltage: 1.5 to 3.6 V
I²C, SMBus 3.0 with ALERT (ARA) support
Programmable thresholds with interrupt pin
Supports up to 1 MHz serial clock
Up to 2 I²C/SMBus slave addresses
Ultra-low current: 1.75 μA in one-shot mode
Sensing specifications
Operating temperature -40 °C to +125 °C
Temperature accuracy (max.): ± 0.5 °C (-10 °C to +60 °C)
16-bit temperature data output
Package specifications
UDFN 2.0 x 2.0 x 0.50 mm, 6 leads with exposed pad down
관련된 링크들
- STMicroelectronics MCP9701 Series, Digital Output Temperature Sensor, Surface Mount, I2C, 0.5 °C, 6-Pin UDFN
- STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin
- STMicroelectronics MCP9701AT Series, Digital Output Temperature Sensor, Surface Mount, 0.5 %, 8-Pin TDFN
- Microchip MCP9701 Series, Voltage Output Voltage Temperature Sensor, Through Hole Mount, Analogue, ±2°C, 3-Pin TO-92
- Microchip MCP9701 Series, Voltage Output Voltage Temperature Sensor, Through Hole Mount, Analogue, ±1°C, 3-Pin TO-92
- Microchip MCP9701T Series, Voltage Output Voltage Temperature Sensor, Surface Mount, Analogue, ±4°C, 3-Pin SOT-23
- Microchip MCP9701AT Series, Voltage Output Voltage Temperature Sensor, Surface Mount, Analogue, ±1°C, 5-Pin SC-70
- Microchip MCP9701AT Series, Voltage Output Voltage Temperature Sensor, Surface Mount, Analogue, ±2°C, 3-Pin SOT-23